Box 03 - Folder 37
File Unit 1.017.162.
Intermediate Shaft Coupling Key,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-466. Intermediate Shaft Coupling Key, Part No. KY-466-1; Dated 1926
Folder A036
File Unit 1.017.163.
Flywheel Pan,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-476. Flywheel Pan, Part No. KY-476-2, Dated 1926
Box 03 - Folder 37
File Unit 1.017.164.
Bushing for Sea Water Inlet,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-477. Bushing for Sea Water Inlet, Part No. KY-477-A, Pattern No. KY-477-A; Dated 1926
Box 03 - Folder 37
File Unit 1.017.165.
Washer for Sea Water Inlet,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-478. Washer for Sea Water Inlet, Part No. KY-478-A, Pattern No. KY-478-A; Dated 1926
Box 03 - Folder 37
File Unit 1.017.166.
Nut for Sea Water Inlet,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-479. Nut for Sea Water Inlet, Part No. KY-479-A, Pattern No. KY-479-A, Dated 1926
Folder A036
File Unit 1.017.167.
Screen for Sea Water Inlet,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-480. Screen for Sea Water Inlet, Part No. KY-480-A, Pattern No. KY-480-A, Dated 1926
Box 03 - Folder 37
File Unit 1.017.168.
Water Outlet Bushing,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-481. Water Outlet Bushing, Part No. KY-481-A, Pattern KY-481; Dated 1927
Box 03 - Folder 37
File Unit 1.017.169.
Lag Stud,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-490. Lag Stud, Part No. KY-490-1, Dated 1927
Box 03 - Folder 37
File Unit 1.017.170.
Lag Studs,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-491. Lag Studs, Part No. KY-491-1, Dated 1927
Box 03 - Folder 37
File Unit 1.017.171.
Lag Stud,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-492. Lag Stud, Part No. KY-492-1, Dated 1927
Folder A036
File Unit 1.017.172.
Side Exhaust Plate,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
KY-493. Side Exhaust Plate, Part No. KY-493-A, Pattern No. KY-493-A, Dated 1926
Box 03 ::Folder A036::Folder A037::Folder A038::Folder A039::Folder A040::Folder B011::Folder B012::Folder C001
Subseries 1.018.
LY type 34-45 h.p. 4 cylinder marine engine plans,
1926-1928
(bulk )
Physical Description:
190 items
Scope and Content
Fabrication plans for "LY" 34-45 h.p. four cylinder marine engine.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "LY" in the title block, and are stored in one 8 inch document box and eight oversized
flat folders.
Folder C001
File Unit 1.018.001.
Engine Bed,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-1. Engine Bed, Part No. LY-1-A, Pattern No. LY-1-A, Left Hand as Shown, Dated 1926
Folder A036
File Unit 1.018.002.
Bearing Cap - Forward,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-2. Bearing Cap - Forward, Part No. LY-2-A, Pattern No. LY-2-A, Dated 1926
Folder A036
File Unit 1.018.003.
Bearing Cap-Intermediate,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-3. Bearing Cap-Intermediate, Part No. LY-3-A, Pattern No. LY-3-A, Dated 1926
Folder A036
File Unit 1.018.004.
Thrust Bearing,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-4. Thrust Bearing, Part No. LY-4-A, Pattern No. LY-4-A, Dated 1926
Folder B011
File Unit 1.018.005.
Crank Case,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-5. Crank Case, Part No. LY-5-A, Pattern No. LY-5-A-Left Hand As Shown, Pattern No. LY-5-B, Right Hand, Dated 1926
Folder A036
File Unit 1.018.006.
Magneto Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-7-A. Magneto Bracket, Pattern No. LY-7-A, Dated 1927
Folder A036
File Unit 1.018.007.
Gear Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-8. Gear Cover, Part No. LY-8-A, Pattern No. LY-8-A, As Shown, Left Hand, Pattern No. LY-8-B, Right Hand, Dated 1926
Folder A036
File Unit 1.018.008.
Forward Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-9. Forward Cover, Part No. LY-9-1, Dated 1927
Folder A036
File Unit 1.018.009.
Starboard Side Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-12. Starboard Side Cover, Part No. LY-12-1, Dated 1927
Folder A036
File Unit 1.018.010.
Port Side Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-13-1. Port Side Cover, Part No. LY-13-1, Dated 1927
Box 03 - Folder 37
File Unit 1.018.011.
Shim - Forward Bearing,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-14. Shim - Forward Bearing, Part No. LY-14-1, Dated 1926
Box 03 - Folder 37
File Unit 1.018.012.
Shim - Intermediate Bearing,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-15. Shim - Intermediate Bearing, Part No. LY-15-1, Dated 1926
Box 03 - Folder 37
File Unit 1.018.013.
Shim - Thrust Bearing,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-16. Shim - Thrust Bearing, Part No. LY-16-1, Dated 1926
Box 03 - Folder 37
File Unit 1.018.014.
Oil Well Cover,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-20. Oil Well Cover, Part No. LY-20-1, Dated 1926
Box 03 - Folder 37
File Unit 1.018.015.
Pointer,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-25-1. Pointer, Part No. LY-25-1; Dated 1928
Folder B011
File Unit 1.018.016.
Crankshaft,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-26. Crankshaft, Part No. LY-26-1, Dated 1926
Folder A037
File Unit 1.018.017.
Air Compressor Eccentric,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-28. Air Compressor Eccentric, Part No. LY-28-A, Pattern No. KY-28-A; Dated 1927.
Folder A037
File Unit 1.018.018.
Camshaft Drive Gear,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-29. Camshaft Drive Gear, Part No. LY-29-1, Dated 1927
Folder A037
File Unit 1.018.019.
Reverse Bevel Gear,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-32. Reverse Bevel Gear, Part No. LY-32-1, Dated 1926
Folder A037
File Unit 1.018.020.
Water Pump Eccentric,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-37. Water Pump Eccentric, Part No. LY-37-A, Pattern No. LY-37-A, Dated 1927
Folder B011
File Unit 1.018.021.
Exhaust Manifold,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-53. Exhaust Manifold, Part No. LY-53-A, Pattern No. LY-53-A, Dated 1927
Folder A037
File Unit 1.018.022.
Water Inlet Manifold,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-75. Water Inlet Manifold, Part No. LY-75-A, Pattern No. LY-75-A, Left Hand As Shown, Pattern No. LY-75-B, Right Hand; Dated
1926
Folder A037
File Unit 1.018.023.
Water Inlet Manifold,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-76. Water Inlet Manifold, Part No. LY-76-A, Pattern No. LY-76-A, Dated 1927
Folder A037
File Unit 1.018.024.
Camshaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-135. Camshaft, Part No. LY-135-1, Dated 1927
Box 03 - Folder 37
File Unit 1.018.025.
Oiler Eccentric,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-138. Oiler Eccentric, Part No. LY-138-A, Pattern No. LY-138-A, Dated 1927
Folder B012
File Unit 1.018.026.
Camshaft Bracket,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-142. Camshaft Bracket, Part No. LY-142-A, Pattern No. LY-142-A, Dated 1926
Box 03 - Folder 37
File Unit 1.018.027.
Key for Oiler Eccentric,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-147. Key for Oiler Eccentric, Part No. LY-147-1, Dated 1927
Folder A037
File Unit 1.018.028.
Push Rod,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-151. Push Rod, Part No. LY-151-1, Dated 1927
Folder A038
File Unit 1.018.029.
Generator Bracket for LY, KY & HY Engines,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-175. Generator Bracket for LY, KY & HY Engines,Part No. LY-175-A, Pattern No. LY-175-A, Dated 1927
Folder A038
File Unit 1.018.030.
Rockershaft Bracket,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-201. Rockershaft Bracket, Part No. LY-201-A, Pattern No. LY-201-A, Dated 1926
Folder A038
File Unit 1.018.031.
Rockershaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-208. Rockershaft, Part No. LY-208-1, Dated 1927
Folder A038
File Unit 1.018.032.
Relief Shaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-209. Relief Shaft, Part No. LY-209-1, Dated 1927
Folder A038
File Unit 1.018.033.
Spark Control Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-251. Spark Control Bracket, Part No. LY-251-A, Pattern No. LY-251-A, Left Hand, As Shown, Pattern No. LY-251-B, Right Hand,
Dated 1927, Reissued 1928
Folder A038
File Unit 1.018.034.
Spark Control Rod,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-253. Spark Control Rod, Part No. LY-253-1, Dated 1927
Folder A038
File Unit 1.018.035.
Reverse Pinion,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-272. Reverse Pinion, Part No. LY-272-A, Pattern No. LY-272-A, Dated 1926
Folder B012
File Unit 1.018.036.
Reverse Drum,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-273. Reverse Drum, Part No. LY-273-A, Pattern No. LY-273-A, Dated 1927
Folder B012
File Unit 1.018.037.
Reverse Friction,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-274. Reverse Friction, Part No. LY-274-A, Pattern LY-274-A, Left Hand, As Shown, Pattern No. LY-274-B, Right Hand, Dated
1927
Folder A038
File Unit 1.018.038.
Reverse Gear for Reverse Friction,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-275. Reverse Gear for Reverse Friction, Part No. LY-275-1, Dated 1926
Folder A038
File Unit 1.018.039.
Brake Shoe Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-276. Brake Shoe Bracket, Part No. LY-276-A, Pattern No. LY-276-A, Dated 1927
Folder A038
File Unit 1.018.040.
Brake Shoe,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-278. Brake Shoe, Part No. LY-278-A, Pattern No. LY-278-A, Dated 1927
Box 03 - Folder 38
File Unit 1.018.041.
Fulcrum Pin for Straps,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-281. Fulcrum Pin for Straps, Part No. LY-281-1, Dated 1927
Box 03 - Folder 38
File Unit 1.018.042.
Bushing for Reverse Drum,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-282. Bushing for Reverse Drum, Part No. LY-282-A, Pattern No. LY-282-A, Dated 1927
Folder A039
File Unit 1.018.043.
Reverse Shaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-285. Reverse Shaft, Part No. LY-285-1; Dated 1927
Box 03 - Folder 38
File Unit 1.018.044.
Reverse Shaft Lever,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-288. Reverse Shaft Lever, Part No. LY-288-A, Pattern No. LY-288-A; Dated 1927
Folder A039
File Unit 1.018.045.
Reverse Lever,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-290. Reverse Lever, Part No. LY-290-1; Dated 1927
Folder A039
File Unit 1.018.046.
Reverse Lever Link,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-294. Reverse Lever Link, Part No. LY-294-1, Dated 1927
Box 03 - Folder 38
File Unit 1.018.047.
Spreader Pipe,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-296. Spreader Pipe, Part No. LY-296-1, Dated 1927
Box 03 - Folder 38
File Unit 1.018.048.
Pin for Reverse Drum,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-301. Pin for Reverse Drum, Part No. LY-301-1, Dated 192
Folder A039
File Unit 1.018.049.
Reverse DOG,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-302. Reverse DOG, Part No. LY-302-A, Pattern No. LY-302-A, Left Hand As Shown, Pattern No. LY-302-B, Right Hand, Dated
1927
Folder A039
File Unit 1.018.050.
Spreader Cone,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-306. Spreader Cone, Part No. LY-306-1, Dated 1927
Folder A039
File Unit 1.018.051.
Thrust Shaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-308. Thrust Shaft, Part No. LY-308-1, Dated 1927
Folder A039
File Unit 1.018.052.
Thrust Shaft Collar,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-310. Thrust Shaft Collar, Part No. LY-310-A, Pattern No. LY-310-A, Dated 1927
Folder A039
File Unit 1.018.053.
Thrust Coupling,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-311. Thrust Coupling, Part No. LY-311-A, Pattern No. LY-311-A, Dated 1927
Box 03 - Folder 38
File Unit 1.018.054.
Key for Reverse Friction,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-312. Key for Reverse Friction, Part No. LY-312-1, Dated 1927
Box 03 - Folder 38
File Unit 1.018.055.
Pin for Thrust Collar,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-314. Pin for Thrust Collar, Part No. LY-314-1, Dated 1927
Folder A039
File Unit 1.018.056.
Water pump Eccentric Strap,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-329. Water pump Eccentric Strap, Part No. LY-329-A, Pattern No. LY-329-A, Dated 1927
Box 03 - Folder 38
File Unit 1.018.057.
Water Inlet Tee,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
LY-334. Water Inlet Tee, Part No. LY-334-A, Pattern No. LY-334-A, Dated 1927
Folder A039
File Unit 1.018.058.
Forward Oiler Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-394. Forward Oiler Bracket, Part No. LY-394-A, Pattern No. LY-394-A, Dated 1927
Box 03 - Folder 38
File Unit 1.018.059.
Oil Pipe Clip (4 Pipes),
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-395. Oil Pipe Clip (4 Pipes), Part No. LY-395-1, Dated 1927
Folder A039
File Unit 1.018.060.
Gas Intake Manifold,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
LY-401. Gas Intake Manifold, Part No. LY-401-A, Pattern No. LY-401-A, Left Hand, As Shown, Pattern No. LY-401-B, Right Hand,
Dated 1927
Folder A039
File Unit 1.018.061.
Intermediate Shaft Coupling Male,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-451. Intermediate Shaft Coupling Male, Part No. LY-451-A, Pattern No. LY-451-A, Dated 1927
Folder A040
File Unit 1.018.062.
Intermediate Shaft Coupling Female,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-452. Intermediate Shaft Coupling Female, Part No. LY-452-A, Pattern No. LY-452-A, Dated 1927
Folder A040
File Unit 1.018.063.
Intermediate Shaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-453. Intermediate Shaft, Part No. LY-453-1, Dated 1927
Folder A040
File Unit 1.018.064.
Stuffing Box,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-454. Stuffing Box, Part No. LY-454-A, Pattern No. LY-454-A, Dated 1927
Folder A040
File Unit 1.018.065.
Gland for Stuffing Box,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-455. Gland for Stuffing Box, Part No. LY-455-A, Pattern No. LY-455-A, Dated 1927
Folder A040
File Unit 1.018.066.
Propeller Shaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-457. Propeller Shaft, Part No. LY-457-1, Dated 1927
Folder A040
File Unit 1.018.067.
Propeller Shaft Sleeve,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-458. Propeller Shaft Sleeve, Part No. LY-458-A, Pattern No. LY-458-A, Dated 1927
Folder A040
File Unit 1.018.068.
Stern Bearing,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-459. Stern Bearing, Part No. LY-459-A, Pattern No. LY-459-A, Dated 1927
Folder A040
File Unit 1.018.069.
Propeller Hub and Bore,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-460. Propeller Hub and Bore, Part No. LY-460, Pattern No. LY-460, Dated 1927
Folder B012
File Unit 1.018.070.
34 x 26 inch propeller,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 blueprint).
Scope and Content Note
"LY-460. 34"" x 26"" Propeller, Part No. LY-460-D, Pattern No. LY-460-D, Dated 1927"
Folder A040
File Unit 1.018.071.
Governor Body,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-610. Governor Body, Part No. LY-610-A, Pattern No. LY-610-A, Dated 1928
Box 03 - Folder 38
File Unit 1.018.072.
Spindle Head,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-611. Spindle Head, Part No. LY-611-A, Pattern No. LY-611-A, Dated 1928
Box 03 - Folder 38
File Unit 1.018.073.
Spindle,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-612. Spindle, Part No. LY-612-1, Dated 1928
Box 03 - Folder 38
File Unit 1.018.074.
Lock Nut,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-613. Lock Nut, Part No. LY-613-1, Dated 1928
Box 03 - Folder 38
File Unit 1.018.075.
Flyweight,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-614. Flyweight, Part No. LY-614-A, Pattern No. LY-614-A, Dated 1928
Box 03 - Folder 38
File Unit 1.018.076.
Flyweight Roller,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-615. Flyweight Roller,Part No. LY-615-1, Dated 1928
Box 03 - Folder 38
File Unit 1.018.077.
Roller Pin,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-616. Roller Pin, Part No. LY-616-1, Dated 1928
Box 03 - Folder 38
File Unit 1.018.078.
Flyweight Pin,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-617. Flyweight Pin, Part No. LY-617-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.079.
Governor Rod,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-618. Governor Rod, Part No. LY-618-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.080.
Governor Rod Head,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-619. Governor Rod Head,Part No. LY-619-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.081.
Adjustment Screw,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-620. Adjustment Screw, Part No. LY-620-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.082.
Governor Spring,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-621. Governor Spring, Part No. LY-621-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.083.
Yoke Carrier Nut,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-622. Yoke Carrier Nut, Part No. LY-622-A, Pattern No. LY-622-A, Dated 1928
Box 03 - Folder 39
File Unit 1.018.084.
Yoke Nut,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-623. Yoke Nut, Part No. LY-623-A, Pattern No. LY-623-A, Dated 1928
Box 03 - Folder 39
File Unit 1.018.085.
Yoke,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-624. Yoke, Part No. LY-624-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.086.
Yoke Lever,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-625. Yoke Lever, Part No. LY-625-A, Pattern No. LY-625-A, Dated 1928
Box 03 - Folder 39
File Unit 1.018.087.
Throttle Lever,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-626. Throttle Lever, Part No. LY-626-A, Pattern No. LY-626-A, Dated 1928
Box 03 - Folder 39
File Unit 1.018.088.
Lever Pin,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-627. Lever Pin, Part No. LY-627-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.089.
Camshaft Extension,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-628. Camshaft Extension, Part No. LY-628-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.090.
Grooved Pulley,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-629. Grooved Pulley, Part No. LY-629-A, Pattern No. LY-629-A, Dated 1928
Box 03 - Folder 39
File Unit 1.018.091.
Throttle Link,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 blueprint).
Scope and Content Note
LY-631. Throttle Link, Part No. LY-631-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.092.
Extension Link for Governor,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-632. Extension Link for Governor, Part No. LY-632-1, Dated 1928
Box 03 - Folder 39
File Unit 1.018.093.
Yoke for Extension Link,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-633. Yoke for Extension Link, Part No. LY-633-1, Dated 1928
Folder A040
File Unit 1.018.094.
Pulley Eccentric for LY Governor,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-634. Pulley Eccentric for LY Governor,Part No. LY-634-A, Pattern No. LY-634-A, Dated 1928
Box 03 - Folder 39
File Unit 1.018.095.
Lock Nut,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
LY-635. Lock Nut, Part No. LY-635-1, Dated 1928
Box 04
Series 2.
Hicks Engine assembly lists,
1927-1946
(bulk )
Physical Description:
202 items
Scope and Content
Assembly lists created in blueprint and diazo printing technique.
Arrangement
Series 2 is arranged into 8 file units representing assembly lists pertaining to various Hicks marine engines: Standard Igniter,
H (8 h.p.) type engine, Y type engine, BY (10 h.p.) type engine, CY (15 h.p.) type engine, DY (6 h.p.) type engine, GY (8
h.p.) type engine, and HY (16 h.p.) type engine
Box 04
File Unit 2.001.
Standard Igniter assembly list,
1933
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
13 items (12 diazos and 1 Other).
Scope and Content Note
M-11-6, Standard Igniter Assemby List for A,B,C,D,E,F,G, Type Y engines, dated 1933, reissued 1945, 1946
Box 04
File Unit 2.002.
H (8 h.p.) Engine, assembly list,
1934
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
24 items (24 blueprints).
The verso of the Type H- 8 h.p. assembly list is stamped with Photographers & Allied Crafts Local 21163 Shop #22.
Scope and Content Note
H Engine, 8 h.p. Assembly List, dated 1934.
Box 04
File Unit 2.003.
Y assembly list,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
29 items (29 blueprints).
Scope and Content Note
"Type ""Y"" Assembly List, dated 1927, reissued 1931"
Box 04
File Unit 2.004.
BY (10 H.P.) assembly list,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
27 items (27 blueprints).
Scope and Content Note
BY Assembly List (10 H.P.) ; 27 indiviual lists relating to the BY series; Dated 1927.
Box 04
File Unit 2.005.
CY (15 H.P.) assembly list,
1946
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
30 items (30 diazos).
Scope and Content Note
CY Assembly List. (15 H.P.) 30 indiviual lists relating to the CY series; Dated 1946.
Box 04
File Unit 2.006.
DY (6 h.p.) assembly list,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
26 items (26 blueprints).
Scope and Content Note
DY Assembly List, (6 h.p.) Dated 1927.
Box 04
File Unit 2.007.
GY (8.p.) assembly list,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
25 items (25 blueprints).
Scope and Content Note
GY Assembly List (8 h.p.) 25 sheets, Dated 1927
Box 04
File Unit 2.008.
HY (16 h.p.) assembly list,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
28 items (27 blueprints and 1 diazo).
Scope and Content Note
HY Assembly List, (16 h.p.), 28 sheets, Dated 1927
Box 04
Series 3.
Bay Specialties Company order forms,
1945
(bulk )
Physical Description:
1 folder (21 sheets)
Scope and Content
21 Completed order forms for parts dated August 22, 1945, in one file folder.
Arrangement
Series 3 is a single file unit.
Box 04
File Unit 3.1.
Bay Specialties Company Hicks engine orders,
1945 August 22
Physical Description:
22 items.
Scope and Content Note
Orders filled by Bay Specialities Company for Hicks engines and or engine parts.
Box 04
Series 4.
Hicks Engines catalog, brochure, order form,
1952
(bulk )
Physical Description:
4 items
Scope and Content
Photocopies of 1 catalog, 1 brochure, and 2 order forms from two separate accessions.
created by Yuba Manufacturing Company
Arrangement
Series 4 includes 4 items: From SAFR-1138 there are the following items: a 33 page catalog; a 4 page brochure; and 1 order
form (2 sheets). From SAFR 1230.4 there is one item: an order form and parts list (4 sheets). Series 4 is stored in an 8 inch
document box.
Box 04 ::Box 05
Series 5.
Hicks Engine graphics,
ca. 1920-1970s
(bulk 1920-1927)
Physical Description:
15 items
Scope and Content
Catalog, order forms, brochure, color negative film strip, original art work, and other material. Graphics depicting Hicks
engine parts; 5 large format,
photographs
augmented by tempera paint mounted on cardboard approximately 16 by 19 inches, artist name on verso, and 2 lithographs of
DY Type Engine parts; a price list dated August 30, 1940 for Model 'D' Standard Carbureter and Repair Parts, 1 original and
1 photocopy; 1 photocopy of Manzel Brothers Company Force Feed Lubricators Instructions and Repair Parts for Classes XD and
XN (undated) from SAFR-1230.3,5. On 10 Sept. 2010 3 images Hicks engines on one 35 negative strip were added to this series.
On 22 Sept. 2010 2 images were added to this series: SAFR-00779 photo collection items (2) consisting of 1 black-and-white
photographic print of the Yuba Engine Factory, measuring 17.5 x 22 inches and mounted on paperboard; and 1 promotional photographic
print for a two-cylinder Hicks engine, measuring 8 x 10 inches.
Materials were created by Hicks Engine Works and/or the Yuba Manufacturing Company. The collection was donated by Bay Specialies
Company.
Arrangement
Series 5 comprises 7 oversized graphics items and 3 items (SAFR-01230.3,5) accreted to HDC 1092 on 16 August 2010. 3 images
(SAFR-1230.6) were accreted to HDC 1092 on September 10, 2010. 2 images (SAFR-00779) were accreted to HDC 1092 on September
22, 2010.