A guide to the Hicks Engine plans and marketing materials, 1918-1950
Processed by: Palma You and Sara Diamond.
San Francisco Maritime National Historical Park
Building E, Fort Mason
San Francisco, CA 94123
Phone: 415-561-7030
Fax: 415-556-3540
SAFR_Historic_Documents@nps.gov
URL: http://www.nps.gov/safr
2011
A Guide to the Hicks Engine plans and marketing materials
HDC1092
San Francisco Maritime National Historical Park, National Park Service
2011, National Park Service
Title: Hicks Engine plans and marketing materials
Date: 1918-1950
Date (bulk): 1919-1940
Identifier/Call Number: HDC1092 (SAFR 17336)
Creator/Collector:
Hicks Iron Works
Hicks Engine Works
Yuba Manufacturing Co. (San Francisco, Calif.)
Bay Specialties Company (Martinez, Calif.)
Physical Description:
2879 items
Repository:
San Francisco Maritime National Historical Park, Historic Documents Department
Building E, Fort Mason
San Francisco, CA 94123
Abstract: The Hicks Engine plans and marketing materials (SAFR 17336, HDC 1092) contains mainly fabrication drawings for Hicks engines
and parts, and assembly lists for Hick's engines produced between 1918 to 1950. A small number of documents include 2 offset
printed illustrations of engine parts for a catalog, 5 original illustrations of engine parts on over sized boards, and photocopies
of a catalog, an order form, a manual, and a price list. This collection is cataloged to the file level and is open for use
with staff assistance.
Physical Location: San Franicsco Maritime NHP, Historic Documents Department
Language(s):
In English.
Access
This collection is open for use unless otherwise noted.
Publication and Use Rights
Some material may be copyrighted or restricted. It is the researcher's obligation to determine and satisfy copyright or other
case restrictions when publishing or otherwise distributing materials found in the collections.
Preferred Citation
[Item description], [Location within collection organization identified by Collection Number/Series Number/File Unit Number/Item
Number], HDC1092 (SAFR 17336), Hicks Engine plans and marketing materials, San Francisco Maritime National Historical Park
Acquisition Information
SAFR-00779
SAFR-01138; SAFR-01230
Bay Specialties Company was originally owned by Mr. Alex Thomson. The collection of fabrication plans, Hick's engine parts,
and related documents were donated to the National Park Service by his grandson in 1994. While in the process of closing the
shop, the grandson decided the material should be placed in an archives and museum.
Historical or Biographical Note
The Hicks 8-h.p. single cylinder four-stroke engine was popular with fishermen, particularly along Fishermen's Wharf in San
Francisco, CA where it was the engine installed onto most Monterey fishing boats from the 1880s until the early 1950s.
Hicks engines were produced by James L. Hicks who established Hicks Iron Works, later Hicks Engine Works, during the late
19th century, in San Francisco, CA after immigrating from Ireland in 1850. Mr. Hicks worked as a machinist from 1870 and later
refined and simplified the single cylinder four-stroke gasoline engine. By 1910, Hicks Engine Works was a notable part of
the drive to produce and manufacture gasoline engines in the San Francisco Bay Area. The Hicks 8-h.p. single cylinder four-stroke
engine was popular with fishermen, particularly along Fishermen's Wharf in San Francisco where it was installed in most Monterey
fishing boats. The Hicks engine was a favorite of Bay Area fishermen because it was easy to start, durable, reliable, steady,
economical to operate and repair, and parts were easily accessible because manufacturing plants were local. James L. Hicks
records his occupation as 'machinist', 'gasoline engine manufacturer' and 'retired' in the 1870, 1910 and 1920 censuses respectively.
By
1920 his age is 88.
Subsequent to Mr. Hicks' retirement, Yuba Manufacturing Company manufactured and produced Hicks Engines from 1918 to 1945.
The Hicks 'heavy duty' marine gas engines were sold through the Hicks Engine Sales Company from two locations: 351 California
Street in San Francisco, and 920 Howard Street in Martinez, California. The Yuba Manufacturing Company plant in Benicia, California,
1898-1957, was known for producing large metal parts and equipment for industries such as dredging, mining, and lumber. To
meet demand during a time of high demand for fabricated iron and steel, The Yuba, as it was known in Benicia, contracted other
companies, such as Bay Specialties Company in Martinez, California to manufacture and distribute Hicks engines and parts.
Bay Specialties Company, 1939-1950, located at 191 Howe Road, Martinez, California, was started by Alex Thomson, the donor's
grandfather. In addition to distribution and manufacture of Hicks engines and engine parts, the company also made parts for
liberty ships, submarines and firearms.
Note: Yuba Manufacturing Company donated company records to the Meriam Library California State University, Chico, Chico,
California 95929-0295. For collection details, visit the Online Archive of California.
Collection Scope and Content
The Hicks Engine plans and marketing materials (SAFR 17336, HDC 1092) contains mainly fabrication drawings for Hicks engines
and parts, and assembly lists for Hick's engines produced between 1918 to 1950. A small number of documents include 2 offset
printed illustrations of engine parts for a catalog, 5 original illustrations of engine parts on over sized boards, and photocopies
of a catalog, an order form, a manual, and a price list. This collection is cataloged to the file level and is open for use
with staff assistance.
On 21 July 2009, material from accession SAFR-1230.1 was added to this collection. This addition is 2 photocopies of a timing
diagram for Hicks Type Y marine engine made by Yuba Manufacturing Company. The drawing number is AY513, measures 47 x 60 cm,
and is dated January 29, 1929. The material is integrated intellectually with the AY series 1.09 and is physically stored
with other over sized AY type drawings.
On 16 August 2010, material from accession SAFR-1230.3-5 was added to this collection. The accession consists of 1 carburetor
parts list with illustrations on the verso, 1 photocopy of the same, 1 photocopy of Hicks Marine Engine order form, and 1
photocopy of Manzel Brothers Company lubricator manual.
On 17 August 2010, material from accession SAFR-1138.1-3, 7 was added to this collection. The accession consists of 1 plan
titled Dimension Table by Yuba Manufacturing Company, drawing number DY-506, 1 catalog, 1 brochure, and 1 order form and parts
list. The latter three are photocopies.
On 10 September 2010, material from accession SAFR-1230.6 was added to this collection. It consists of 3 frames (images) on
a 35 mm negative strip of Hicks engines.
On 22 September 2010, material from accession SAFR-00779 photo collection items (2) was added to this collection. It consists
of 1 black-and-white photographic print of the Yuba Engine Factory, measuring 17.5 x 22 inches and mounted on paperboard;
and 1 promotional photographic print for a two-cylinder Hicks engine, measuring 8 x 10 inches.
This collection was formerly titled Yuba Manufacturing Company records.
Collection Arrangement
The collection is organized into 5 series.
Series 1, Fabrication plans, is organized into 18 subseries, each of which correspond to a particular Hicks engine type. Please
see sub-series descriptions for details.
Series 2, Assembly Lists, is organized into 8 subseries, each series describes a particular Hicks engine type. Please see
sub-series descriptions for details.
Series 3, Bay Specialties Company Hicks engine orders filled on August 22, 1945.
Series 4: Catalog, brochures, and order form.
Series 5: Oversized graphics and other documents. This series includes two accretions.
This collection was partially processed several years before it was cataloged and described. The arrangement correspondes
to the physical organization of the collections as it was found at the time of processing, but it is not known if this arrangement
was original to the collection or imposed during the initail processing.
Subjects and Indexing Terms
Marine engines--Design and construction
Motorboats--Gasoline engines
Internal combustion engines--Design and construction
Internal combustion engine industry--California--Benicia
Internal combustion engine industry--California--Martinez
Internal combustion engine industry--California--San Francisco
Hicks Iron Works
Yuba Manufacturing Co. (San Francisco, Calif.)
Blueprints
Diazotypes
Photographs
Engineering drawings
Commercial catalogs
Boat engines
Technical drawings
Box 01-03
Series 1.
Hicks Engines fabrication plans,
1918-1952
(bulk )
Physical Description:
2591 items
Scope and Content
Series 1 contains blueprint and diazo reproductions of fabrication plan for 16 types of marine engines designed and specified
by Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties Company, as well as a small number
of plans for unspecified engine types.
21 July 2009 Accretion to collection SAFR-1230.1, AY-513, photocopies of a Timing diagram. Working copies of fabrication plans
to manufacture Hick's heavy duty marine gas engines. Drawings were heavily used and show soil, grease and foundry dust. Duplicate
copies of the same drawing are kept, due to poor condition of the majority of the drawings.
Fragile, brittle drawings, most are folded. Surface has fine powder from foundry grit, grease stains cover many surfaces.
Many are faded, and only somewhat readable. If reproductions are requested, an Archivist must evaluate the physical condition
and image quality to determine if the original can be duplicated.
Arrangement
Series 1 is divided into 18 subseries defined by engine type, based on information in each plan's title bar. Subseries 1.01
through 1.06 are described by engine type defined by a single letter; 1.07 and 1.08 include plans which either never came
into production or which were not assigned a specific type. The use of a single letter and number system indicates that these
were early plans created by Hicks Iron Works and Hicks Engine Works. Subsequently, Yuba Manufacturing Company utilized the
early Hicks fabrication plans, however, the letter Y and often a number was added to distinguish the plan, creating the two
letter system. This numbering system is found in series 1.10 through 1.18. Yuba Manufacturing also created original fabrication
plans with their company name in the title block. Approximately 1345 of the over 2,850 plans bear the Yuba Manufacturing Company
name in the title block.
Series: 1. Fabrication plans, subseries 1-18 as follows: (1) B type 8 hp. 1 and 2 type marine engine plans; (2) C type 10
h.p. 1 and 2 type marine engine plans; (3) D type 12 h.p. 1, 2 and 3 type marine engine plans; (4) E type 16 h.p. 1, 2 and
3 type marine engine plans; (5) F type 20 h.p. 1 and 2 type marine engine plans; (6) W type marine engine plans; (7) Sketches
of marine engine and parts plans; (8) Miscellaneous engine and parts plans; (9) AY type marine engine plans; (10) BY type
10-14 h.p. 2 cylinder marine engine plans; (11) CY type 15-22 h.p. 3 cylinder marine engine plans; (12) DY type 6-9 h.p. 1
cylinder marine engine plans; (13) EY type 12-16 h.p. 2 cylinder marine engine plans; (14) FY type 18-27 h.p. 3 cylinder marine
engine plans; (15) GY type 8-11 h.p. 1 cylinder marine engine plans; (16) HY type 16-22 h.p. 2 cylinder marine engine plans;
(17) KY type 24-32 h.p. 3 cylinder marine engine plans; and (18) LY type 34-45 h.p. 4 cylinder marine engine plans.
Box 01-03
Subseries 1.001.
B type 8 h.p. 1 and 2 type marine engine plans,
1918-1927
(bulk )
Physical Description:
19 items
Scope and Content
Fabrication plans for 8 h.p. "B" type 1 and 2 marine engines.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "B" in the title block, and are stored in 2 B size flat folders.
Folder B001
File Unit 1.001.001.
Double Cylinder,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
B-350. Double Cylinder 16 h.p., Part No. 16-D-1, Dated 1918, Reissued 1928, 1935
Folder B001
File Unit 1.001.002.
Bed Plate,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
B-353. Bed Plate, Part No. B-353-B, Pattern No. B-353-B, Dated 1927, Reissued 1928
Folder B001
File Unit 1.001.003.
Double Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (4 diazos).
Scope and Content Note
B354. Double Cylinder 12 h.p., Part No. 12-D-1, Dated 1919, Reissued 1930, 1935, 1945, 1950
Folder B001
File Unit 1.001.004.
Double Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
B-358. Double Cylinder 20 h.p. F-1 engine, dated 1918
Folder B002
File Unit 1.001.005.
Cylinder,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
B-470. Cylinder 8 h.p., Type H engine, Part No. C-470-A2, Pattern No. C-470, Dated 1927, Reissued 1935, 1939
Folder B002
File Unit 1.001.006.
Cylinder Head,
1924
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
B-1563. Cylinder Head, Dated 1924, Reissued 1926
Folder B002
File Unit 1.001.007.
Cylinder Head for 8 h.p. Engine, old style,
1923
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
B-1651. Cylinder Head for 8 h.p. Engine, old style, Pattern B-1651, Dated 1923, Reissued 1930, 1931
Folder B003 ::Folder B004
Subseries 1.002.
C type 10 h.p. 1 and 2 type marine engine plans,
1918-1931
(bulk )
Physical Description:
22 items
Scope and Content
Fabrication plans for 10 h.p. "C" type 1 and 2 marine engines.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "C" in the title block, and are stored in 2 B size flat folders.
Folder B003
File Unit 1.002.001.
Piston 7 1/2 inches,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
C-468. Piston 7 1/2", for C-1, F-2, G-3 engines, Part No. 10-E-1, Dated 1918, Reissued 1927"
Folder B003
File Unit 1.002.002.
Cylinder Head,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
C-469. Cylinder Head 6 h.p. Type H Engine, Part No. C-469-A2, Dated 1927, Reissued 1939
Folder B003
File Unit 1.002.003.
Cylinder Head,
1918
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (4 diazos).
Scope and Content Note
C-470. Cylinder 8-11 h.p. Type GY Engine, Part No. 8-D-1, Dated 1918, Reissued 1935
Folder B003
File Unit 1.002.004.
Cylinder Head,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
C-471. Cylinder Head 10 h.p. for Type H/BY Engine, Dated 1926, Reissued 1930, 1935
Folder B003
File Unit 1.002.005.
Cylinder 6 h.p. - Old Type H Engine,
1931
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 diazos).
Scope and Content Note
C-478. Cylinder 6 h.p. - Old Type H Engine, Dated 1931, Reissued 1935
Folder B004
File Unit 1.002.006.
Top Muffler Elbow,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
C-483. Top Muffler Elbow, Part No. C-483 for 6 h.p. engine, Dated 1926, Reissued 1939
Folder B004
File Unit 1.002.007.
Cylinder Head 20 h.p.,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
C-1553. Cylinder Head 20 h.p. for F-1 Type engine, Dated 1926, Reissued 1928
Folder B004
File Unit 1.002.008.
Side Exhaust Manifold,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
C-1564. Side Exhaust Manifold, Part No. 1564, Dated 1926, Reissued 1927
Folder B004
File Unit 1.002.009.
Goose Neck,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
C-1-631. Goose Neck, Part No. C-1631, Dated 1927, Reissued 1928
Folder B004
File Unit 1.002.010.
Cylinder 8 h.p. for Old Type Hicks engine,
1931
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
C-1650. Cylinder 8 h.p. for Old Type Hicks engine, Part No. C-1650 (C-470) for GY engine, Dated 1931, Reissued 1935
Folder B004
File Unit 1.002.011.
Taps on Cylinder for Air Pump Bracket,
1930
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
C-1650. Taps on Cylinder for Air Pump Bracket 8 h.p., Dated 1930. See specific note on drawing.
Folder A001 ::Folder A002::Folder A003::Folder A004::Folder A005
Subseries 1.003.
D type 12 h.p. 1, 2 and 3 type marine engine plans,
1918-1928
(bulk )
Physical Description:
86 items
Scope and Content
Fabrication plans for 12 h.p. "D" type 1,2, and 3 marine engines.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "D" in the title block, and are stored in five A sized flat folders.
Folder A001
File Unit 1.003.001.
Piston,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
7 items (5 blueprints and 2 diazos).
Scope and Content Note
D-630. Piston, Part No. D-630-A, Dated 1927, Reissued 1935
Folder A001
File Unit 1.003.002.
Crank Brasses Assembly,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-631. Crank Brasses Assembly, Part No. E691/692 for 10 h.p. BY Type engine, Dated 1918, Reissued 1927
Folder A001
File Unit 1.003.003.
Crank Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
D-632. Crank Shaft HY 16 h.p. engine, Part No. E-16-B-1, Dated 1918, Reissued 1935
Folder A001
File Unit 1.003.004.
Ignitor Body (Left Hand),
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-633. Ignitor Body (Left Hand), Part No. 10-N-3 for BY, EY, HY, FY Type engines, Dated 1918, Reissued 1927
Folder A001
File Unit 1.003.005.
Crank Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
5 items (3 blueprints and 2 diazos).
Scope and Content Note
D-635. Crank Shaft GY (B-1) 8 h.p., Part No. H-B-1, Dated 1918, Reissued 1930, 1945
Folder A002
File Unit 1.003.006.
Thrust Coupling,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-636. Thrust Coupling, 10,12,16 h.p., Part No. 10-L-18, for BY, EY, HY Type engines
Folder A002
File Unit 1.003.007.
Cap for Second Main Bearing,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-638. Cap for Second Main Bearing, Part No. 8-A-30 for 8 h.p. GY Type engine, Dated 1919, Reissued 1927
Folder A002
File Unit 1.003.008.
Crank Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-640. Crank Shaft, Part No. 6-9-1, Dated 1919, Reissued 1926, 1935
Folder A002
File Unit 1.003.009.
Cap for Second Bearing next to Air Pump Eccentric,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
D-641. Cap for Second Bearing next to Air Pump Eccentric, Part No. 10-A-14 for BY, EY, HY Type engines, Dated 1919, Reissued
1930
Folder A002
File Unit 1.003.010.
Cap for First Main Bearing,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-643. Cap for First Main Bearing, Dated 1927
Folder A002
File Unit 1.003.011.
Stuffing Box,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-645. Stuffing Box, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1927
Folder A002
File Unit 1.003.012.
Piston - 6 inches,
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
D-646. Piston-6", Part No. 6-E-1, for A-1, D-2 Type engines "
Folder A002
File Unit 1.003.013.
Crank Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (1 blueprint and 3 diazos).
Scope and Content Note
D-647. Crank Shaft, Part No. 12-B-1, for D-1 Type engine, Dated 1919, Reissued 1927, 1930, 1948
Folder A002
File Unit 1.003.014.
Muffler,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
D-651. Muffler, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1948
Folder A002
File Unit 1.003.015.
Cap for Thrust Bearing,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-652. Cap for Thrust Bearing, Part No. 8-A-16 for B-1 Type engine, Dated 1927
Folder A002
File Unit 1.003.016.
Crank Brass, Lower Half,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-662. Crank Brass, Lower Half, for F-2, G-3 Type engines, Dated 1919, Reissued 1927
Folder A002
File Unit 1.003.017.
Crank Brass, Upper Half,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-663. Crank Brass, Upper Half, for F-2, G-3 Type engines, Dated 1919, Reissued 1927
Folder A003
File Unit 1.003.018.
Miter Gear on Crank for Reverse Drive,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
D-669. Miter Gear on Crank for Reverse Drive, Part No. 6-B-11, for A-1 Type engine, Dated 1919, Reissued 1926
Folder A003
File Unit 1.003.019.
Miter Gear for Reverse Friction,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-670. Miter Gear for Reverse Friction, Part No. 6-1-6, for A-1 Type engine, Dated 1919, Reissued 1928
Folder A003
File Unit 1.003.020.
Miter Gear Idler for Reverse,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-671. Miter Gear Idler for Reverse, Part No. 6-L-2, for A-2 Type engine, Dated 1919, Reissued 1927
Folder A003
File Unit 1.003.021.
Reverse Drum,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-672. Reverse Drum, Part No. 6-L-1, for A-1 Type engine, Dated 1919, Reissued 1927
Folder A003
File Unit 1.003.022.
Reverse Friction,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
D-673. Reverse Friction, Part No. 6-L-5, for A-1 Type engine, Dated 1919, Reissued 1926, 1939
Folder A003
File Unit 1.003.023.
Splash Plate,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
D-674. Splash Plate, for E-1 Type engine, Dated 1919, Reissued 1936
Folder A003
File Unit 1.003.024.
Splash Plate,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
D-675. Splash Plate, for D-1 Type engine, Dated 1919, Reissued 1936
Folder A004
File Unit 1.003.025.
Gear for Camshaft Drive and Water Pump Eccentric,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
D-677. Gear for Camshaft Drive and Water Pump Eccentric, Part No. 10-H-2, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued
1938
Folder A004
File Unit 1.003.026.
Stern Bearing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-686. Stern Bearing, Part No. 10-T-6, for C-1, D-1, E-1 Type engines, Dated 1920, Reissued 1928
Folder A004
File Unit 1.003.027.
Elbow for Exhaust Manifold,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-688. Elbow for Exhaust Manifold, Part No. 80-P-42, for K-1 Type engine, Dated 1920, Reissued 1927
Folder A004
File Unit 1.003.028.
Cover for Reverse Drum,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-690. Cover for Reverse Drum, for F-1 Type engine, Dated 1920, Reissued 1927
Folder A004
File Unit 1.003.029.
Cylinder Head Gasket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 diazos).
Scope and Content Note
D-696. Cylinder Head Gasket, Part No. D-696, Dated 1927, Reissued 1945
Folder A004
File Unit 1.003.030.
Piston with Oil Ring,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1513. Piston with Oil Ring, 16 h.p., Dated 1924, Reissued 1927
Folder A004
File Unit 1.003.031.
Shimming Washers,
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1574. Shimming Washers, for GY, EY, FY, LY Type engines
Folder A004
File Unit 1.003.032.
Water Control Piping for Engine with Top Exhaust Mounted Forward,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
D-1600. Water Control Piping for Engine with Top Exhaust Mounted Forward, Dated 1927
Folder A004
File Unit 1.003.033.
Connecting Rod,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
D-1608. Connecting Rod, Part No. D-1608, for KY Type Engine, Dated 1927
Folder A005
File Unit 1.003.034.
Crank Pin Bearing, Upper Half,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1609. Crank Pin Bearing, Upper Half, Part No. D-1609, Pattern No. D-1609, Dated 1927
Folder A005
File Unit 1.003.035.
Crank Pin Bearing Lower Half,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1610. Crank Pin Bearing Lower Half, Part No. D-1610, Pattern No. D-1610, Dated 1927
Folder A005
File Unit 1.003.036.
Reverse Lever,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1619. Reverse Lever, Part No. D-1619, Dated 1927
Folder A005
File Unit 1.003.037.
Magneto Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1623. Magneto Bracket, Part No. D-1623, Pattern No. D-1623, Dated 1927
Folder A005
File Unit 1.003.038.
Hot Air Jacket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 blueprint).
Scope and Content Note
D-1624. Hot Air Jacket, Part No. D-1624, Dated 1927
Folder A005
File Unit 1.003.039.
Gear Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1628. Gear Cover, Part No. 1628, Pattern No. D-1628, Dated 1927, Reissued 1928
Folder A005
File Unit 1.003.040.
Gear Cover,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
D-1637. Gear Cover, Part No. 1637-A, Pattern No. D-1637-A, Dated 1928
Folder A005
File Unit 1.003.041.
Generator Bracket Strap for All Hicks Engines,
1934
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
D-1659. Generator Bracket Strap for All Hicks Engines, Dated 1934
Box 01 ::Folder A006
Subseries 1.004.
E type 16 h.p. 1, 2 and 3 type marine engine plans,
1918-1928
(bulk )
Physical Description:
386 items
Scope and Content
Fabrication plans for 16 h.p. "E" type 1,2 and 3 marine engines.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "E" in the title block, and are stored in one 8 inch box and one A size flat file.
Box 01 - Folder 01
File Unit 1.004.001.
Ignitor Hammer,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
E-667. Ignitor Hammer, Part No. 6-N-11, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, Dated 1918, Reissued 1930
Box 01 - Folder 01
File Unit 1.004.002.
Ignitor Spindle,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-668. Ignitor Spindle, Part No. 6-N-10, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.003.
Push Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-669. Push Rod, Part No. 16-0-10, for E-4 Type engine, Dated 1918, Reissued 1926
Box 01 - Folder 01
File Unit 1.004.004.
Push Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-670. Push Rod, Part No. 10-0-1, for C-2 Type engine, Dated 1918, Reissued 1926
Box 01 - Folder 01
File Unit 1.004.005.
Push Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-671. Push Rod, Part No. 20-0-1, for F-4 Type engine, Dated 1918, Reissued 1926
Box 01 - Folder 01
File Unit 1.004.006.
Hose Bushing for Water Pump,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-672. Hose Bushing for Water Pump, for C-2, D-2, E-2 Type engines, Dated 1918, Reissued 1926
Box 01 - Folder 01
File Unit 1.004.007.
Eccentric Strap for Oiler,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-674. Eccentric Strap for Oiler, for C-1, D-1, E-1, F-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.008.
Push Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-676. Push Rod, Part No. 8-0-1, for B-2 Type engine, Dated 1918, Reissued 1926
Box 01 - Folder 01
File Unit 1.004.009.
Clutch Spreader Cone,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-677. Clutch Spreader Cone, Part No. 8-L-13, for B-1, C-1, D-1, E-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.010.
Water By Pass,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-680. Water By Pass, for C-1, D-2, E-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.011.
Propeller Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-681. Propeller Shaft, Part No. 6-U-2, for A-1, B-1 Type engines, Dated 1920, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.012.
Propeller Bore,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
3 (1 blueprint and 2 diazos__[Type of Unit]items.
Scope and Content Note
E-684. Propeller Bore, Part No. 10-U-1, Pattern No. BY, CY, EY-460-A
Box 01 - Folder 01
File Unit 1.004.013.
Eccentric for Oiler,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-686. Eccentric for Oiler, for C-1, D-1, E-1, F-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.014.
Connecting Rod,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-687. Connecting Rod, Part No. 10-E-4, for C-1 Type engine, Dated 1920, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.015.
Miter Gear for Reverse Drive on Crank Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-688. Miter Gear for Reverse Drive on Crank Shaft, Part No. 8-B-11, for B-1 Type engine, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.016.
Miter Gear for Reverse Friction,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
4 (1 blueprint and 3 diazos__[Type of Unit]items.
Scope and Content Note
E-689. Miter Gear for Reverse Friction, Part No. 8-L-6 (BY 275), for B-1, C-1, D-1, E-1 Type engines, Dated 1918, Reissued
1927, 1938, 1947
Box 01 - Folder 01
File Unit 1.004.017.
Side Plate for Oiler Eccentric,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-690. Side Plate for Oiler Eccentric, for C-1, D-1, E-1, F-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.018.
Crank Brass Lower Half,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-691. Crank Brass Lower Half, Part No. 10-E-13, for C-1 Type engine, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.019.
Crank Brass Upper Half,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-692. Crank Brass Upper Half, Part No. 10-E-12, for C-1 Type engine, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.020.
Cam Shaft and Assembly,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-693. Cam Shaft and Assembly, Part No. 6-H-1, for A-1, B-1 Type engines, Dated 1920, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.021.
Miter Gear for Reverse Drive and Gear on Crank Shaft for Cam Shaft Drive,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
E-694. Miter Gear for Reverse Drive and Gear on Crank Shaft for Cam Shaft Drive, Part No. 10-B-4, for C-1, D-1, E-1 Type engines,
Dated 1918, Reissued 1931
Box 01 - Folder 01
File Unit 1.004.022.
Fly Wheel,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-695. Fly Wheel, Part No. 16-B-6, for E-1 Type engine, Dated 1920, Reissued 1926
Box 01 - Folder 01
File Unit 1.004.023.
Gear for Oiler,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-696. Gear for Oiler, Part No. 6-Q-14, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.024.
Bushing for Connecting Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-697. Bushing for Connecting Rod, for C-1, F-2, G-3 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 01
File Unit 1.004.025.
Standard,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-699. Standard, Part No. 8-C-1, for B-4 Type engine, Dated 1919, Reissued 1928
Box 01 - Folder 02
File Unit 1.004.026.
Standard,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-700. Standard, Part No. 6-C-1, for A-4 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.027.
Reverse Cam,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-704. Reverse Cam, Part No. A-B-C-D-E, for A-1, B-1, C-1, D-1, E-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.028.
Spreader for Reverse Drum Straps,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-705. Spreader for Reverse Drum Straps, Part No. B-D-5 171, for B-1, C-1, D-1,E-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.029.
Gear for Magneto,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-706. Gear for Magneto, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.030.
Gear for Magneto and Oiler Drive on Cam Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-707. Gear for Magneto and Oiler Drive on Cam Shaft, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.031.
Bushing for Connecting Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-708. Bushing for Connecting Rod, for B-1, E-2 Type engines, Dated 1918
Box 01 - Folder 02
File Unit 1.004.032.
Bushing for Connecting Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
E-709. Bushing for Connecting Rod, for A-1, D-2 Type engines, Dated 1918, Reissued 1932
Box 01 - Folder 02
File Unit 1.004.033.
Gear for Magneto,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-710. Gear for Magneto, Part No. 10-R-5, for C-1, D-1 E-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.034.
Eccentric for Water Pump,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-711. Eccentric for Water Pump, for B-1 Type engine, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.035.
Miter Gear for Reverse Shift,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
E-712. Miter Gear for Reverse Shift, for B-2, C-2, D-2, E-2 Type engines, Reissued 1927, 1946
Box 01 - Folder 02
File Unit 1.004.036.
Fly Wheel,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-713. Fly Wheel, Part No. 8-B-6, for B-1 Type engine, Dated 1920, Reissued 1926
Box 01 - Folder 02
File Unit 1.004.037.
Strap for Reverse,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-714. Strap for Reverse, Part No. 8-K-5, for B-2, C-2, D-2, E-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.038.
Water By Pass,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-715. Water By Pass, Part No. A-B, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.039.
Bolt for Connecting Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-716. Bolt for Connecting Rod, Part No. S-34, for C-2 Type engine, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.040.
Cross Guide for Spark Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-717. Cross Guide for Spark Rod, for A-1, B-1, C-1, D-2, E-2 Type engines, Dated 1918, Reissued 1926
Box 01 - Folder 02
File Unit 1.004.041.
Bearing for Camshaft Spark Rod Side,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-718. Bearing for Camshaft Spark Rod Side, for A-2 B-1 Type engines, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.042.
Cover for Round Oil Cellar,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-719. Cover for Round Oil Cellar, for A-1, B-1, C-2, D-3, E-3, F-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 02
File Unit 1.004.043.
Thrust Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
E-721. Thrust Shaft, for B-1 Type engine, Dated 1918, Reissued 1927, 1935
Box 01 - Folder 02
File Unit 1.004.044.
Thrust Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
E-722. Thrust Shaft, for C-1, D-1, E-1 Type engines, Dated 1918, Reissued 1936
Box 01 - Folder 02
File Unit 1.004.045.
Connecting Rod,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-723. Connecting Rod, Part No. 16-E-4, for E-2 Type engine, Dated 1920, Reissued 1926, 1927
Box 01 - Folder 02
File Unit 1.004.046.
Propeller Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-724. Propeller Shaft, Part No. 10-U-2, for C-1, D-1, E-1 Type engines, Dated 1920, Reissued 1928
Box 01 - Folder 02
File Unit 1.004.047.
Double Flange for Discharge Water,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-725. Double Flange for Discharge Water, Part No. 12-F-3, for D-1, E-1 Type engines, Dated 1920, Reissued 1926
Box 01 - Folder 03
File Unit 1.004.048.
Bolt for Connecting Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-727. Bolt for Connecting Rod, for A-2, B-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.049.
Bushing for Propeller Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-728. Bushing for Propeller Shaft, Part No. 10-U-3, for C-1, D-1, E-1 Type engines, Dated 1920, Reissued 1928
Box 01 - Folder 03
File Unit 1.004.050.
Ignitor Stop,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-729. Ignitor Stop, Part No. 6-N-17, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.051.
Eccentric Strap and Rod for Water Pump,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
4 (1 blueprint and 3 diazos__[Type of Unit]items.
Scope and Content Note
E-730. Eccentric Strap and Rod for Water Pump, Part No. 10-J-2, for C-1, D-1, E-1 Type engines, Dated 1920, Reissued 1926
Box 01 - Folder 03
File Unit 1.004.052.
Ignitor Collar,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-732. Ignitor Collar, Part No. 6-N-12, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.053.
Gland for Stuffing Box,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E.733. Gland for Stuffing Box, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.054.
Throttle Shaft (Eccentric),
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-734. Throttle Shaft (Eccentric), Part No. 10-G-5, for C-1 Type engine, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.055.
Shaft for Exhaust Relief (Eccentric),
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-735. Shaft for Exhaust Relief (Eccentric), Part No. 10-G-9, for C-1 Type engine, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.056.
Crank Disc for Spark Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-736. Crank Disc for Spark Rod, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.057.
Throttle Shaft (Eccentric),
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-737. Throttle Shaft (Eccentric), Part No. 6-G-5, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.058.
Shaft for Exhaust Relief (Eccentric),
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-738. Shaft for Exhaust Relief (Eccentric), Part No. 6-G-9, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.059.
Pin for Reverse Drum,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-742. Pin for Reverse Drum, for B-2, C-2, D-2, E-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.060.
Eccentric Strap and Rod for Water Pump,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
5 (2 blueprints and 3 diazos__[Type of Unit]items.
Scope and Content Note
E-743. Eccentric Strap and Rod for Water Pump, Part No. 8-J-2, for B-1 Type engine, Dated 1918, Reissued 1927, 1936
Box 01 - Folder 03
File Unit 1.004.061.
Wrist Pin,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-744. Wrist Pin, Part No. 6-E-3, for A-1, D-2 Type engines, dated 1918, Reissued 1926
Box 01 - Folder 03
File Unit 1.004.062.
Wrist Pin,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-745. Wrist Pin, Part No. 8-E-3, for B-1, E-2 Type engines, Dated 1918, Reissued 1926
Box 01 - Folder 03
File Unit 1.004.063.
Wrist Pin,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-746. Wrist Pin, Part No. 10-E-3, for C-1, F-2, G-3, J-4 Type engines, Dated 1919, Reissued 1928
Box 01 - Folder 03
File Unit 1.004.064.
Thrust Collar,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-747. Thrust Collar, Part No. 8-L-417, for B-1 Type engine, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.065.
Bearing for Spark Eccentric Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-748. Bearing for Spark Eccentric Shaft, Part No. 6-M-3, for A-1, B-1, C-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.066.
Gland for Water Pump,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-749. Gland for Water Pump, Part No. 6-J-6, for A-1 Type engine, Dated 1920, Reissued 1927
Box 01 - Folder 03
File Unit 1.004.067.
Reverse Friction,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
5 (2 blueprints and 3 diazos__[Type of Unit]items.
Scope and Content Note
E-750. Reverse Friction, for B-1 Type engine, Dated 1918, Reissued 1936
Box 01 - Folder 04
File Unit 1.004.068.
Spring for Reverse DOG,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-751. Spring for Reverse DOG, Part No. E-751 for DY engine, Dated 1926
Box 01 - Folder 04
File Unit 1.004.069.
Reverse Friction,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
6 (2 blueprints and 4 diazos__[Type of Unit]items.
Scope and Content Note
E-752. Reverse Friction, Part No. BY-274-A, for C-1, D-1, E-1 Type engines, Dated 1918, Reissued 1927, 1939
Box 01 - Folder 04
File Unit 1.004.070.
Ignitor Pawl - Right Hand,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
E-753. Ignitor Pawl - Right Hand, Part No. 6-N-13, for A-1, B-1, D-1, E-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.071.
Ignitor Pawl - Left Hand,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-754. Ignitor Pawl - Left Hand, Part No. 10-N-14, for C-1, D-1, E-1, G-3 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.072.
Cover for 2nd Main Bearing Oil Well,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-755. Cover for 2nd Main Bearing Oil Well, Part No. E-755, Pattern No. E-755, Dated 1926
Box 01 - Folder 04
File Unit 1.004.073.
Throttle Handle,
1928
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-757. Throttle Handle, Part No. E-757-A-2, Pattern No. E-757, Dated 1928
Box 01 - Folder 04
File Unit 1.004.074.
Exhaust Valve with Stem Finishing Drawing,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
E-762. Exhaust Valve with Stem Finishing Drawing, Part No. 6-F-11, for A-1,B-1, D-1 Type engines, Dated 1918, Reissued 1927,
1939
Box 01 - Folder 04
File Unit 1.004.075.
Bracket for Exhaust Relief Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-766. Bracket for Exhaust Relief Shaft, Part No. 6-G-2, for A-1, B-1 Type engines, Dated 1918, Reissued 1926, 1927
Box 01 - Folder 04
File Unit 1.004.076.
Crank Brass Lower Half,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-767. Crank Brass Lower Half, for A-1, B-1 Type engines, Dated 1918, Reissued 1926
Box 01 - Folder 04
File Unit 1.004.077.
Inlet Valve with Stem Finishing Drawing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-768. Inlet Valve with Stem Finishing Drawing, Part No. 10-F-7, for C-1 Type engine, Dated 1920, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.078.
Exhaust Valve with Stem Finishing Drawing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-769. Exhaust Valve with Stem Finishing Drawing, Part No. 10-F-11, Dated 1920, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.079.
Exhaust Rocker Arm,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-770. Exhaust Rocker Arm, for A-1, B-1 Type engines, Dated 1927
Box 01 - Folder 04
File Unit 1.004.080.
Gear Guard,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-773. Gear Guard, for B-1 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.081.
Throttle Handle Stop,
1928
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-782. Throttle Handle Stop, Dated 1928
Box 01 - Folder 04
File Unit 1.004.082.
Spark Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-784. Spark Rod, Part No. E-185, for E-2 Type engine, dated 1919, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.083.
Spring for Inlet Valve,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-785. Spring for Inlet Valve, Part No. 6-F-10 -E-188, for A-1, B-1, D-2,E-2 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.084.
Spring for Exhaust Valve,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-786. Spring for Exhaust Valve, Part No. 6-F-14, for A-1, B-1, D-2, E-2 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.085.
Spark Rod,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 blueprint).
Scope and Content Note
E-787. Spark Rod, Part No. E-787-2, Dated 1927
Box 01 - Folder 04
File Unit 1.004.086.
Spiral Gear on Crank Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-788. Spiral Gear on Crank Shaft, Part No. 6-B-8, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 04
File Unit 1.004.087.
Plunger for Water Pump,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
5 items (2 blueprints and 3 diazos).
Scope and Content Note
E-790-B. Plunger for Water Pump, for B-1 Type engine, Dated 1919, Reissued 1928, 1939
Box 01 - Folder 05
File Unit 1.004.088.
Cylinder for Water Pump,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
5 items (2 blueprints and 3 diazos).
Scope and Content Note
E-791. Cylinder for Water Pump, Part No. 8-J-4, for B-1 Type engine, dated 1918, Reissued 1927, 1939
Box 01 - Folder 05
File Unit 1.004.089.
Gland for Water Pump,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
5 items (2 blueprints and 3 diazos).
Scope and Content Note
E-792. Gland for Water Pump, Part No. 8-J-6, for B-1 Type engine, dated 1918, reissued 1927, 1939
Box 01 - Folder 05
File Unit 1.004.090.
Cover for Square Oil Cellar,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-798. Cover for Square Oil Cellar, Part No. 6-A-17, for A-3,B-3,C-1,D-1,E-1,F-1 Type engines, Dated 1919
Box 01 - Folder 05
File Unit 1.004.091.
Spiral Gear on Cam Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (1 blueprint and 3 diazos).
Scope and Content Note
E-801. Spiral Gear on Cam Shaft, Part No. 6-H-17, for A-1, B-1 Type engines, Dated 1918, Reissued 1929, 1939
Box 01 - Folder 05
File Unit 1.004.092.
Inlet Cam,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-802. Inlet Cam, Part No. 6-H-9, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.093.
Exhaust Cam,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-803. Exhaust Cam, Part No. 6-H-11, for A-1, B-1 Type engines, Dated 1920, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.094.
Bracket for Throttle Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
E-804. Bracket for Throttle Shaft, Part No. 6-G-1, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.095.
Inlet Cam,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-806. Inlet Cam, Part No. 12-H-9, for D-2, E-2 Type engines, Dated 1920, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.096.
Propeller Nut,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-805. Propeller Nut, Part No. 6-U-5, for A-1, B-1 Type engines, Dated 1918, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.097.
Exhaust Cam Left Hand,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-808. Exhaust Cam Left Hand, Part No. 12-H-12, for D-1, E-1 Type engines, Date 1920, Reissued 1926
Box 01 - Folder 05
File Unit 1.004.098.
Inlet Cam,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-810. Inlet Cam, Part No. 10-H-9, for C-1 Type engine, Dated 1920, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.099.
Exhaust Cam Right Hand,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
E-812. Exhaust Cam Right Hand, Part No. 12-H-11, for D-1, E-1 Type engine, Dated 1920, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.100.
Eccentric Strap for Spark Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
E-813. Eccentric Strap for Spark Rod, for C-1, D-1, E-2, F-2 Type engines, Dated 1919, Reissued 1934
Box 01 - Folder 05
File Unit 1.004.101.
Gland for Water Pump,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-814. Gland for Water Pump, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1926
Box 01 - Folder 05
File Unit 1.004.102.
Inlet Valve with Stem,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-815. Inlet Valve with Stem, Part No. 6-F-7, for A-1, B-1, D-2 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 05
File Unit 1.004.103.
Plunger for Water Pump,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-817. Plunger for Water Pump, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1926
Box 01 - Folder 05
File Unit 1.004.104.
Cylinder for Water Pump,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-818. Cylinder for Water Pump, Part No. 10-J-4, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1928
Box 01 - Folder 05
File Unit 1.004.105.
Intake Rocker Arm,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-819. Intake Rocker Arm, for A-1, B-1 Type engines, Dated 1919, Reissued 1928
Box 01 - Folder 05
File Unit 1.004.106.
Crank Brass Upper Half,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-822. Crank Brass Upper Half, for A-1, B-1 Type engines, Dated 1918, Reissued 1926
Box 01 - Folder 06
File Unit 1.004.107.
Gland for Stuffing Box,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-825. Gland for Stuffing Box, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.108.
Thrust Coupling,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-826. Thrust Coupling, Part No. 8-L-18, for B-1 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.109.
Reverse Cam Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-828. Reverse Cam Shaft, for B-1, C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.110.
Spreader for Reverse Drum Straps,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
6 items (2 blueprints and 4 diazos).
Scope and Content Note
E-830. Spreader for Reverse Drum Straps, Part No. 8-K-9, for B-1, C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.111.
Push Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-835. Push Rod, Part No. 12-0-1, for D-4 Type engine, Dated 1919, Reissued 1926
Box 01 - Folder 06
File Unit 1.004.112.
Bolt for Connecting Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-836. Bolt for Connecting Rod, Part No. 12-E-14, for D-4, E-4 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.113.1.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
E-846. Stud for Cylinder, Part No. 12-D-5, for D-4, E-4 Type engines, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.113.2.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
E-847. Stud for Cylinder, Part No. 12-D-3, for D-5, E-5 Type engines, Dated 1919, Reissued date 1926
Box 01 - Folder 06
File Unit 1.004.114.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-848. Stud for Cylinder, Part No. 12-D-4, for D-3, E-3 Type engines, Dated 1919, Reissued date 1926
Box 01 - Folder 06
File Unit 1.004.115.
Plate for Muffler,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-849. Plate for Muffler, for C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.116.
Stud for Muffler,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-855. Stud for Muffler, Part No. 10-D-2, for C-2, D-2, E-2 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.117.
Long Idler Gear,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-856. Long Idler Gear, Part No. 20-l-23, for F-3 Type engine, Dated 1920, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.118.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-857. Stud for Cylinder, Part No. 6-D-7, for A-2, B-2 Type engines, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.119.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-858. Stud for Cylinder, Part No. 6-D-8, for A-2, B-2 Type engines, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.120.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-859. Stud for Cylinder, Part No. 6-D-9, for A-1, B-1 Type engines, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.121.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-860. Stud for Cylinder, Part No. 10-D-13, for C-2, F-2 Type engines, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.122.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-861. Stud for Cylinder, Part No. 10-D-12, for C-2, Type engine, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.123.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-862. Stud for Cylinder, Part No. 10-D-11, for C-3, F-5 Type engines, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.124.
Stud for Cylinder,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-863. Stud for Cylinder, Part No. 10-D-10, for C-1 Type engines, Dated 1919, Reissued date 1927
Box 01 - Folder 06
File Unit 1.004.125.
Spark Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E- 865. Spark Rod, for D-2 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 06
File Unit 1.004.126.
Spark Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E- 866. Spark Rod, for C-1 Type engine, Dated 1919, Reissued 1928
Box 01 - Folder 07
File Unit 1.004.127.
Short Idler Gear,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-875. Short Idler Gear, for F-3 Type engine, dated 1920, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.128.
Screw for Reverse DOG,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-879. Screw for Reverse DOG, Part No. 20-L-9, for F-2, G-2 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.129.
Roller for Intake Rocker Arm,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-881. Roller for Intake Rocker Arm, for G-3 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.130.
Roller for Exhaust Rocker Arm,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-882. Roller for Exhaust Rocker Arm, for G-3 Type engine, Dated 1919, Reissued 1926
Box 01 - Folder 07
File Unit 1.004.131.
Side Plate for Spark Rod Eccentric,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
E-884. Side Plate for Spark Rod Eccentric, Part No. 10-H-4, for C-1, D-2, E-2, F-2 Type engines, Dated 1919, Reissued 1934
Box 01 - Folder 07
File Unit 1.004.132.
Eccentric for Spark Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprints).
Scope and Content Note
E-885. Eccentric for Spark Rod, for C-1, D-2, E-2, F-2 Type engines, Dated 1919, Reissued 1928
Box 01 - Folder 07
File Unit 1.004.133.
Gear for Reverse Friction,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-886. Gear for Reverse Friction, for F-1 Type engine, Dated 1920, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.134.
Bolt for Connecting Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-895. Bolt for Connecting Rod, for F-4, G-6 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.135.
Handle for Exhaust Relief,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-911. Handle for Exhaust Relief, for A-1, B-1 Type engines, Dated 1919, Reissued 1926
Box 01 - Folder 07
File Unit 1.004.136.
Eccentric for Water Pump,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-912. Eccentric for Water Pump, for A-1 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.137.
Eccentric Strap and Rod for Water Pump,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-913. Eccentric Strap and Rod for Water Pump, Part No. 6-J-2, for A-1 Type engine, Dated 1919, Reissued 1926
Box 01 - Folder 07
File Unit 1.004.138.
Pin for Reverse Drum,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-914. Pin for Reverse Drum, for A-2 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.139.
Spring for Reverse Cam Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-916. Spring for Reverse Cam Shaft, for B-2, C-2, D-2, E-2 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.140.
Link for Reverse Lever,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-917. Link for Reverse Lever, for C-2, D-2, E-2 Type engines, Dated 1919, Reissued 1926
Box 01 - Folder 07
File Unit 1.004.141.
Handle for Throttle,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-920. Handle for Throttle, for C-2, D-1, E-1 Type engines, Dated 1919, Reissued 1926
Box 01 - Folder 07
File Unit 1.004.142.
Handle for Exhaust Relief,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-921. Handle for Exhaust Relief, for D-1, E-1, F-1 Type engines, Dated 1919, Reissued 1926
Box 01 - Folder 07
File Unit 1.004.143.
Inlet Valve with Stem Finishing Drawing,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-925. Inlet Valve with Stem Finishing Drawing, Part No. 16-F-7, for E-2 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.144.
Exhaust Valve with Stem Finishing Drawing,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-926. Exhaust Valve with Stem Finishing Drawing, Part No. 16-F-11, for E-2 Type engine, Dated 1919, Reissued 1927
Folder A006
File Unit 1.004.145.
Throttle Shaft (Eccentric),
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-929. Throttle Shaft (Eccentric), Part No. 12-G-5, for D-1, E-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.146.
Bracket No.1 for Throttle Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-930. Bracket No.1 for Throttle Shaft, Part No. 12-G-1, for D-1, E-1 Type engines, Dated 1919, Reissued 1926, 1927
Box 01 - Folder 07
File Unit 1.004.147.
Bracket for Exhaust Relief Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-931. Bracket for Exhaust Relief Shaft, Part No. 12-G-2, for D-1, E-1 Type engines, Dated 1919, Reissued 1926, 1927
Box 01 - Folder 07
File Unit 1.004.148.
Bracket No.2 for Throttle Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-932. Bracket No.2 for Throttle Shaft, Part No. 12-G-3, for D-1, E-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.149.
Handle for Spark Advance Right Hand,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-933. Handle for Spark Advance Right Hand, for A-1, B-1, D-1, E-1, F-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.150.
Shaft for Exhaust Relief (Eccentric),
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-938. Shaft for Exhaust Relief (Eccentric), Part No. 12-G-9, for D-1, E-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.151.
Saddle Flange for Hot Air Jacket,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-939. Saddle Flange for Hot Air Jacket, for A-1, B-1 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 07
File Unit 1.004.152.
Yoke for Clutch Spreader Cone,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
E-946. Yoke for Clutch Spreader Cone, Part No. 8-L-14, for B-1, C-1, D-1, E-1 Type engines, Dated 1919, Reissued 1926, 1939
Box 01 - Folder 08
File Unit 1.004.153.
Thrust Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
E-947. Thrust Shaft, for A-1 Type engine, Dated 1919, Reissued 1937
Box 01 - Folder 08
File Unit 1.004.154.
Strap for Reverse Drum,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-948. Strap for Reverse Drum, Part No. A-2 RT Hand, A-2 LT Hand, for A-1 Type engine, Dated 1919, Reissued 1926
Box 01 - Folder 08
File Unit 1.004.155.
Exhaust Rocker Arm Left Hand,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E- 949. Exhaust Rocker Arm Left Hand, for D-1, E-1 Type engine, Dated 1919, Reissued 1927
Box 01 - Folder 08
File Unit 1.004.156.
Clutch Spreader Cone,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-950. Clutch Spreader Cone, for A-1 Type engine, Dated 1919, Reissued 1926
Box 01 - Folder 08
File Unit 1.004.157.
Yoke for Clutch Spreader Cone,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-951. Yoke for Clutch Spreader Cone, for A-1 Type engine, Dated 1919, Reissued 1926
Box 01 - Folder 08
File Unit 1.004.158.
Brake Shoe,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-952. Brake Shoe, for B-2, C-2, D-2, E-2 Type engines, Dated 1919, Reissued 1927
Box 01 - Folder 08
File Unit 1.004.159.
Brake Shoe,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-953. Brake Shoe, for A-2 Type engine, Dated 1919, Reissued 1926
Box 01 - Folder 08
File Unit 1.004.160.
Thrust Coupling,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-955. Thrust Coupling, Part No. 6-L-18, for A-1 Type engine, dated 1919, reissued 1926
Box 01 - Folder 08
File Unit 1.004.161.
Exhaust Rocker Arm Right Hand,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-959. Exhaust Rocker Arm Right Hand, for D-1, E-1 Type engine, dated 1919, reissued 1926, 1927
Box 01 - Folder 08
File Unit 1.004.162.
Intake Rocker Arm Left Hand,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-960. Intake Rocker Arm Left Hand, for D-1, E-1 Type engines, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.163.
Intake Rocker Arm Right Hand,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-961. Intake Rocker Arm Right Hand, for D-1, E-1 Type engines, dated 1919, reissued 1926
Box 01 - Folder 08
File Unit 1.004.164.
Muffler Top,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-962. Muffler Top, for A-1, B-1 Type engines, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.165.
Elbow for Side Muffler,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-967. Elbow for Side Muffler, Part No. 6-P-22, for A-1, B-1 Type engines, dated 1920, reissued 1927
Box 01 - Folder 08
File Unit 1.004.166.
Spark Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-968. Spark Rod, Part No. 6-M-1, for A-1 Type engine, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.167.
Push Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-969. Push Rod, Part No. 6-O-1, for A-1 Type engine, dated 1919, reissued 1926
Box 01 - Folder 08
File Unit 1.004.168.
Intake Pipe,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-971. Intake Pipe, for B-1 Type engine, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.169.
Fork for Push Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-972. Fork for Push Rod, for C-2, F-4 Type engines, dated 1919, reissued 1927, 1929
Box 01 - Folder 08
File Unit 1.004.170.
Exhaust Valve with Stem Finishing Drawing,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (4 blueprints).
Scope and Content Note
E-973. Exhaust Valve with Stem Finishing Drawing, for G-3 Type engine, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.171.
Bracket for Oiler,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-974. Bracket for Oiler, for D-1, E-1 Type engine, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.172.
Bearing for Cam Shaft Magneto Side,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-978. Bearing for Cam Shaft Magneto Side, for A-1, B-1 Type engine, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.173.
Connecting Rod,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-979. Connecting Rod, Part No. 6-E-4, for A-1 Type engine, dated 1919, reissued 1926, 1927
Box 01 - Folder 08
File Unit 1.004.174.
Muffler Top,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-982. Muffler Top, for A-1, B-1 Type engines, dated 1919, reissued 1927
Folder A006
File Unit 1.004.175.
Muffler,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (2 blueprints, 1 diazo, and 1 order form).
Scope and Content Note
E-983. Muffler, for A-1, B-1 Type engine, dated 1919, reissued 1927, 1946
Box 01 - Folder 08
File Unit 1.004.176.
Hot Air Pipe,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-984. Hot Air Pipe, Part No. 6-P-11, for A-1, B-1 Type engines, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.177.
Muffler Top,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-985. Muffler Top, for C-1, D-1, E-1, F-1 Type engines, dated 1919, reissued 1927
Box 01 - Folder 08
File Unit 1.004.178.
Muffler Screen,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-986. Muffler Screen, Part No. E-986-2, dated 1927
Box 01 - Folder 09
File Unit 1.004.179.
Spreader Cam for Reverse Drum Strap,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-987. Spreader Cam for Reverse Drum Strap, Part No. 6-K-9, for A-1 Type engine, dated 1919, reissued 1926
Box 01 - Folder 09
File Unit 1.004.180.
Fly Wheel,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-989. Fly Wheel, Part No. 6-B-6, for A-1 Type engine, dated 1920, reissued 1926
Box 01 - Folder 09
File Unit 1.004.181.
Crank Brass Lower Half,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-994. Crank Brass Lower Half, Part No. 12-E-13, for D-2, E-2 Type engines, dated 1920, reissued1927
Box 01 - Folder 09
File Unit 1.004.182.
Crank Brass Upper Half,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-995. Crank Brass Upper Half, Part No. 12-E-12, for D-2, E-2 Type engines, dated 1920, reissued 1926, 1927
Box 01 - Folder 09
File Unit 1.004.183.
Exhaust Valve with Stem Roughing Drawing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-996. Exhaust Valve with Stem Roughing Drawing, Part No. 12-F-11, for C-1 Type engine, dated 1920, reissued 1926, 1927
Box 01 - Folder 09
File Unit 1.004.184.
Exhaust Valve with Stem Roughing Drawing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-997. Exhaust Valve with Stem Roughing Drawing, Part No. 12-F-7, for C-1 Type engine, dated 1920, reissued 1926
Box 01 - Folder 09
File Unit 1.004.185.
Spring Retainer,
1925
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1551. Spring Retainer, Pattern No. E-1551, dated 1925, reissued 1928
Box 01 - Folder 09
File Unit 1.004.186.
Intake valve spring for 6, 8, 12 and 16 h.p. H Hicks engines,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
"E-1560. Intake Valve Spring for 6,8,12, & 16 h.p. ""H"" Hicks Engines, Drawing No. 158136 in 1945, dated 1926, reissued 1927,
1945"
Box 01 - Folder 09
File Unit 1.004.187.
Exhaust valve spring for 6, 8, 12 and 16 h.p. H engines,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
"E-1561. Exhaust Valve Spring for 6,8,12,& 16 h.p. ""H"" Engines, dated 1926, reissued 1927"
Box 01 - Folder 09
File Unit 1.004.188.
Pin for Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1602. Pin for Cover, Part No. E-1602, dated 1927
Box 01 - Folder 09
File Unit 1.004.189.
Main Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1603. Main Bearing Shim, dated 1927
Box 01 - Folder 09
File Unit 1.004.190.
Main Bearing Shim-2nd,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1604. Main Bearing Shim-2nd, Part No. E-1604, dated 1927
Box 01 - Folder 09
File Unit 1.004.191.
Thrust Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1605. Thrust Bearing Shim, Part No. E-1605, dated 1927
Box 01 - Folder 09
File Unit 1.004.192.
Camshaft Gear Key,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E- 1606. Camshaft Gear Key, Part No. E-1606, dated 1927
Box 01 - Folder 09
File Unit 1.004.193.
Splash Plate,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 blueprint).
Scope and Content Note
E-1607. Splash Plate, Part No. E-1607, dated 1927
Box 01 - Folder 09
File Unit 1.004.194.
Crank Pin Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1611. Crank Pin Bearing Shim, Part No. E-1611, dated 1927
Box 01 - Folder 09
File Unit 1.004.195.
Crank Pin Bearing Bolt,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1612. Crank Pin Bearing Bolt, Part No. E-1612, dated 1927
Box 01 - Folder 09
File Unit 1.004.196.
Inlet Valve,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1613. Inlet Valve, Part No. E-1613, dated 1927
Box 01 - Folder 09
File Unit 1.004.197.
Relief Shaft Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1615. Relief Shaft Bracket, Part No. E-1615, Pattern No. E-1615, dated 1927, reissued 1928
Box 01 - Folder 09
File Unit 1.004.198.
Throttle Shaft Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1616. Throttle Shaft Bracket, Part No. E-1616, Pattern No. E-1616, dated 1927
Box 01 - Folder 09
File Unit 1.004.199.
Pin for Round Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1617. Pin for Round Cover, Part No. E-1617, dated 1927
Box 01 - Folder 10
File Unit 1.004.200.
Camshaft Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1618. Camshaft Bearing Shim, Part No. E-1618, dated 1927
Box 01 - Folder 10
File Unit 1.004.201.
Thrust Coupling Key,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1620. Thrust Coupling Key, Part No. E-1620, dated 1927
Box 01 - Folder 10
File Unit 1.004.202.
Oiler Mount Plate,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1621. Oiler Mount Plate, Part No. E-1621, dated 1927
Box 01 - Folder 10
File Unit 1.004.203.
Oiler Spacer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1622. Oiler Spacer, Part No. E-1622, dated 1927
Box 01 - Folder 10
File Unit 1.004.204.
Carburetor Tube,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1625. Carburetor Tube, Part No. E-1625, dated 1927
Box 01 - Folder 10
File Unit 1.004.205.
Carburetor Gasket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1626. Carburetor Gasket, Part No. E-1626, dated 1927
Box 01 - Folder 10
File Unit 1.004.206.
Gasket for Intake Pipe,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1627. Gasket for Intake Pipe, Part No. E-1627, dated 1927
Box 01 - Folder 10
File Unit 1.004.207.
Water By Pass Gasket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1629. Water By Pass Gasket, Part No. E-1629, dated 1927
Box 01 - Folder 10
File Unit 1.004.208.
Muffler Gasket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1630. Muffler Gasket, Part No. E-1630, dated 1927
Box 01 - Folder 10
File Unit 1.004.209.
Exhaust Elbow Gasket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1632. Exhaust Elbow Gasket, Part No. E-1632, dated 1927
Box 01 - Folder 10
File Unit 1.004.210.
Fulcrum Pin,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (4 blueprints).
Scope and Content Note
E-1638. Fulcrum Pin, Part No. E-1638, Dated 1928, reissued 1929
Box 01 - Folder 10
File Unit 1.004.211.
Gear Guard Spacer,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1639. Gear Guard Spacer, Part No. E-1639, dated 1928
Box 01 - Folder 10
File Unit 1.004.212.
Hose Connection,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1645. Hose Connection, dated 1928
Box 01 - Folder 10
File Unit 1.004.213.
Bracket for Oiling Tubes,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1646. Bracket for Oiling Tubes, dated 1928
Box 01 - Folder 10
File Unit 1.004.214.
Oil Pipe Clip (6-Pipes),
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
E-1649. Oil Pipe Clip (6-Pipes), Part No. E-1647, dated 1928
Box 01 - Folder 10
File Unit 1.004.215.
Bushings for Water Pumps,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1648, Bushings for Water Pumps, Part No. E-1648, dated 1928
Box 01 - Folder 10
File Unit 1.004.216.
Generator Bracket,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
E-1649. Generator Bracket , dated 1928
Box 01 ::Folder A006
Subseries 1.005.
F type 20 h.p. 1 and 2 type marine engine plans,
1918-1920
(bulk )
Physical Description:
72 items
Scope and Content
Fabrication plans for 20 h.p. "F" type 1 and 2 marine engines.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "F" in the title block, and are stored in one 8 inch box and one A size flat file.
Box 01 - Folder 11
File Unit 1.005.001.
Hex Nut for Ignitor Bushing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-12. Hex Nut for Ignitor Bushing, Part No. 6-N-5, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, dated 1920
Box 01 - Folder 11
File Unit 1.005.002.
Roller for Push Rod Fork,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-17. Roller for Push Rod Fork, Part No. 6-O-4, for A-2, B-2, C-2, D-4, E-4, F-4 Type engines, dated 1920, reissued 1926,
1927
Box 01 - Folder 11
File Unit 1.005.003.
Pin for Crank Disc.,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-18. Pin for Crank Disc., Part No. 6-H-20, for A-1, B-1 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.004.
Pin for Water Pump Plunger,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-19. Pin for Water Pump Plunger, Part No. 6-J-8, for A-1, B-1, C-1, D-1, E-1 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.005.
Bushing for Thrust Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
F-27. Bushing for Thrust Shaft, Part No. 8-L-16, for B-1, C-1, D-1, E-1 Type engines dated 1920, reissued 1927, 1938
Box 01 - Folder 11
File Unit 1.005.006.
Pin for Intake and Exhaust Rocker Arms,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-29. Pin for Intake and Exhaust Rocker Arms, Part No. 6-G-13, for A-2,B-2,D-4,E-4 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.007.
Eccentric for Throttle Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-30. Eccentric for Throttle Shaft, Part No. 12-G-6, for D-1, E-1 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.008.
Pin for Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-32. Pin for Reverse DOG, Part No. 8-L-12, for B-2, C-2, D-2, E-2 Type engines, dated 1920, 1927
Box 01 - Folder 11
File Unit 1.005.009.
Spreader Pipe for Reverse Drum Strap,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-33. Spreader Pipe for Reverse Drum Strap, Part No. 8-K-7, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.010.
Screw for Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-35. Screw for Reverse DOG, Part No. 8-L-9, for B-2, C-2, D-2, E-2 Type engines, dated 1920, reissued 1926
Box 01 - Folder 11
File Unit 1.005.011.
Ignitor Steel Bushing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-39. Ignitor Steel Bushing, Part No. 6-N-4, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, dated 1920
Box 01 - Folder 11
File Unit 1.005.012.
Eccentric Shaft for Spark Advance,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-40. Eccentric Shaft for Spark Advance, Part No. 6-M-6, for A-1, B-1, C-1, D-2, F-2 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.013.
Spring for Reverse DOG,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-41. Spring for Reverse DOG, Part No. 8-L-6, for B-2, C-2, D-2, E-2 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.014.
Ignitor Anvil,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-43. Ignitor Anvil, Part No. 6-N-6, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, dated 1920
Box 01 - Folder 11
File Unit 1.005.015.
Spring for Ignitor Pawl Left Hand,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-44. Spring for Ignitor Pawl Left Hand, Part No. 6-N-15, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, dated 1920, reissued
1927
Box 01 - Folder 11
File Unit 1.005.016.
Spring for Ignitor Pawl Right Hand,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-45. Spring for Ignitor Pawl Left Hand, Part No. 6-N-16, for A-1, B-1, C-1, D-2, E-2, F-2 Type engines, dated 1920, reissued
1927
Box 01 - Folder 11
File Unit 1.005.017.
Nut for Exhaust and Inlet Valve Stem,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
F-46. Nut for Exhaust and Inlet Valve Stem, Part No. 6-F-9, for A-2, B-2, D-4, E-4 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.018.
Nut for Exhaust and Inlet Valve Stem,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-47. Nut for Exhaust and Inlet Valve Stem, Part No. 10-F-9, for C-2, F-4 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.019.
Washer for Thrust Coupling,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-49. Washer for Thrust Coupling, Part No. 6-L-23, for A-1 Type engine, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.020.
Washer for Thrust Collar,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-50. Washer for Thrust Collar, Part No. 6-L-21, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.021.
Washer for Thrust Collar and Coupling,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-51. Washer for Thrust Collar and Coupling, Part No. 8-L-21, for B-2, C-1, D-1, E-1 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.022.
Stud for Water Pump,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-53. Stud for Water Pump, Part No. 8-J-5 for B-2,C-2,D-2,E-2 Type engines, dated 1920, reissued 1926
Box 01 - Folder 11
File Unit 1.005.023.
Stud for Stuffing Box,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-54. Stud for Stuffing Box, Part No. 6-T-10, for A-2, B-2 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.024.
Pin for Push Rod For Roller,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-60. Pin for Push Rod For Roller, Part No. 6-O-5, for A-2, B-2, C-2, D-4, E-4, F-4 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.025.
Spark Tripper,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-62. Spark Tripper, Part No. 6-M-9, for A-1,B-1,C-1,D-2,E-2,F-2 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.026.
Push Rod End,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-63. Push Rod End, Part No. 10-O-9, for C-2, F-4 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.027.
End Hinge for Spark Rod,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-64. End Hinge for Spark Rod, Part No. 6-M-8, for A-1,B-1,C-1,D-2,E-2,F-2 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.028.
Crank End for Spark Rod,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-66. Crank End for Spark Rod, Part No. 6-M-13, for A-1, B-1 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.029.
Pin for Brake Shoe,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-71. Pin for Brake Shoe, Part No. 20-K-4, for F-2, G-2 Type engines, dated 1919, reissued 1926
Box 01 - Folder 11
File Unit 1.005.030.
Fulcrum Pin for Reverse Drum Straps,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-72. Fulcrum Pin for Reverse Drum Straps, Part No. 8-K-6, for B-2,C-2,D-2,E-2 Type engines, dated 1919, reissued 1927
Box 01 - Folder 11
File Unit 1.005.031.
Spring for Spark Tripper,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-73. Spring for Spark Tripper, Part No. 6-M-11, for A-1,B-1,C-1,D-2,E-2,F-2 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.032.
Mica Washer for Ignitor,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-74. Mica Washer for Ignitor, Part No. 6-N-7, for 6,8,10,12,16,20 h.p. type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.033.
Spring for Exhaust Rocker Arm,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-75. Spring for Exhaust Rocker Arm, Part No. 6-G-16, for A-1, B-1 Type engines, dated 1918, reissued 1927
Box 01 - Folder 11
File Unit 1.005.034.
Pin for Brake Shoe,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (4 blueprints).
Scope and Content Note
F-76. Pin for Brake Shoe, Part No. 8-K-4, for B-2, C-2, D-2, E-2 Type engines, dated 1919, reissued 1927
Box 01 - Folder 11
File Unit 1.005.035.
Cam Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-79. Cam Shaft, Part No. 12-H-1, for D-1, E-1 Type engines, dated 1920, reissued 1928
Box 01 - Folder 11
File Unit 1.005.036.
Piston Ring, 6",
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
F-81. Piston Ring, 6", Part No. 6-E-2 for A-3, D-6 Type engines, dated 1920, reissued 1945"
Box 01 - Folder 11
File Unit 1.005.037.
Piston Ring, 6 1/2",
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
F-83. Piston Ring, 6 1/2", Part No. 8-E-2 for B-3, E-6 Type engines, dated 1920, reissued 1945"
Box 01 - Folder 11
File Unit 1.005.038.
Piston Ring, 7 1/2",
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
F-85. Piston Ring, 7 1/2", Part No. 10-E-2 for C-4, F-8 Type engines, dated 1920, reissued 1945"
Box 01 - Folder 11
File Unit 1.005.039.
Propeller Bore,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-84. Propeller Bore, Part No. 6-U-1, for A-1, B-1 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.040.
Spring for Push Rod,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-86. Spring for Push Rod, Part No. 12-O-7, for D-4, E-4 Type engines, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.041.
Screw for Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-89. Screw for Reverse DOG, Part No. 6-L-9, for A-2, dated 1920, reissued 1926
Box 01 - Folder 11
File Unit 1.005.042.
Pin for Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
F-90. Pin for Reverse DOG, Part No. 6-L-12, for A-2 Type engine, dated 1920, reissued 1927
Box 01 - Folder 11
File Unit 1.005.043.
Stud for Cam Shaft Bearing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
F-95. Stud for Cam Shaft Bearing, Part No. 6-H-21, for A-2, B-2 Type engines, dated 1920, reissued 1927
Box 01 ::Folder A006::Folder A007
Subseries 1.006.
W type marine engine,
1925-1928
(bulk )
Physical Description:
64 items
Scope and Content
Fabrication plans for "W" type marine engine.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "W" in the title block, and are stored in one 8 inch box and two A size flat files.
Folder A006
File Unit 1.006.001.
Bilge Pump Body,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-1-A. Bilge Pump Body, Part No. W-1-A, Pattern No. W-1-A, dated 1926, reissued 1928
Folder A006
File Unit 1.006.002.
Bilge Pump Flange (Open),
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-2. Bilge Pump Flange (Open), Part No. W-2-A, Pattern No. W-2, dated 1927
Box 01 - Folder 12
File Unit 1.006.003.
Bilge Pump Gland,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-4-B. Bilge Pump Gland, Part No. W-4, dated 1926
Box 01 - Folder 12
File Unit 1.006.004.
Gland Nut for Bilge Pump,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-5-E. Gland Nut for Bilge Pump, Part No. W-5, dated 1926
Folder A006
File Unit 1.006.005.
Bilge Pump Rotor,
1925
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-6-E. Bilge Pump Rotor, Part No. W-6, Pattern No. W-6, dated 1925, reissued 1926
Box 01 - Folder 12
File Unit 1.006.006.
Rotor Blade,
1925
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-7-E. Rotor Blade, Part No. W-7, W-8, W-9, W-10, dated 1925, reissued 1926
Folder A006
File Unit 1.006.007.
Base for Bilge Pump,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-11. Base for Bilge Pump, Part No. W-11-B, Pattern No. W-11-B, dated 1927
Folder A006
File Unit 1.006.008.
Sub-Base for Bilge Pump,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (4 blueprints).
Scope and Content Note
W-12. Sub-Base for Bilge Pump, Part No. W-12-A/B, Pattern No. W-12-A/B, dated 1926, reissued 1927
Box 01 - Folder 12
File Unit 1.006.009.
Base Pin for Bilge Pump,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-13. Base Pin for Bilge Pump, Part No. W-13, dated 1926
Box 01 - Folder 12
File Unit 1.006.010.
Spring for Bilge Pump and Generator,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-14. Spring for Bilge Pump and Generator, Part No. W-14-1, dated 1927
Box 01 - Folder 12
File Unit 1.006.011.
Base Latch for Bilge Pump,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-15. Base Latch for Bilge Pump, Part No. W-15, dated 1926
Box 01 - Folder 12
File Unit 1.006.012.
Gasket for Bilge Pump,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-16. Gasket for Bilge Pump, Part No. W-16, dated 1926
Box 01 - Folder 12
File Unit 1.006.013.
Friction Pulley,
1925
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (1 blueprint, 2 diazos, and 1 other).
Scope and Content Note
W-17-A. Friction Pulley, Part No. W-17, Pattern No. W-17, dated 1925, reissued 1926, 1927
Folder A006
File Unit 1.006.014.
Pulley for Bilge Pump,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-18. Pulley for Bilge Pump, Part No. W-18, Pattern No. W-18, dated 1926
Folder A006
File Unit 1.006.015.
Generator Saddle,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
6 items (5 blueprint and 1 diazo).
Scope and Content Note
W-26. Generator Saddle, Part No. W-26-C, W-26-B, Pattern No. W-26-C, W-26-B, dated 1927
Box 01 - Folder 12
File Unit 1.006.016.
Base Latch for Generator,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-27-E. Base Latch for Generator, Part No. W-27, dated 1926
Box 01 - Folder 12
File Unit 1.006.017.
Base Pin for Generator Generator Bracket Pin,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (4 blueprints).
Scope and Content Note
W-28-1. Base Pin for Generator; W-28-2. Generator Bracket Pin, Part No. W-28-1 & 2, dated 1927
Box 01 - Folder 12
File Unit 1.006.018.
Strainer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-29. Strainer, Part No. W-29-A , Pattern No. W-29-A, dated 1927
Folder A007
File Unit 1.006.019.
Valve Body (Three Way),
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-50. Valve Body (Three Way), Part No. W-50-A, Pattern No. W-50-A, dated 1927
Box 01 - Folder 12
File Unit 1.006.020.
Valve Stem,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-51. Valve Stem, Part No. W-51-1, dated 1927
Box 01 - Folder 12
File Unit 1.006.021.
Gland,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-52. Gland, Part No. W-52-A, Pattern No. W-52-A, dated 1927
Box 01 - Folder 12
File Unit 1.006.022.
Gland Nut,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-53. Gland Nut, Part No. W-53-A, Pattern No. W-53-A, dated 1927
Box 01 - Folder 12
File Unit 1.006.023.
Hand Wheel,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-54. Hand Wheel, Part No. W-54-A, Pattern No. W-54-A, dated 1927
Box 01 - Folder 12
File Unit 1.006.024.
Valve Disc,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-55. Valve Disc, Part No. W-55-2, dated 1927
Box 01 - Folder 12
File Unit 1.006.025.
Valve Stem,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-61. Valve Stem, Part No. W-61-1, dated 1928
Box 01 - Folder 12
File Unit 1.006.026.
Valve Lever,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
W-62. Valve Lever, Part No. W-62-A, Pattern No. W-62-A, dated 1928
Box 02 ::Folder A007::Folder A008
Subseries 1.007.
Sketches of marine engines and parts,
1919-1927
(bulk )
Physical Description:
104 items
Scope and Content
Fabrication plans for "Sketch" type marine engine.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "Sketch" in the title block, and are stored in one 8 inch box and one A size flat
file.
Box 02 - Folder 13
File Unit 1.007.001.
Spark Rod,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-5. Spark Rod, Part No. 20-M-1, for F-2 Type engine, dated 1926, reissued 1927
Box 02 - Folder 13
File Unit 1.007.002.
Clutch Spreader Cone,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-19. Clutch Spreader Cone, Part No. P-4-2 for G-4 Type engine, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.003.
Eccentric Strap and Rod for Water Pump,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
Sketch-67. Eccentric Strap and Rod for Water Pump, for F-1 Type engine, dated 1920, reissued 1934
Box 02 - Folder 13
File Unit 1.007.004.
Spring for Push Rod,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
Sketch-90. Spring for Push Rod, for C-2, F-4 Type engines, dated 1920
Box 02 - Folder 13
File Unit 1.007.005.
Water By Pass,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-97. Water By Pass, for F-2 Type engine, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.006.
Inlet Valve with Stem Rough Drawing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-201. Inlet Valve with Stem Rough Drawing, Part No. 20-F-7, for F-2 Type engine, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.007.
Inlet Valve with Stem Rough Drawing,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-202. Inlet Valve with Stem Rough Drawing, Part No. 20-F-11, for F-2 Type engine, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.008.
End Flange for Side Exhaust,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-243. End Flange for Side Exhaust, Part No. 243, Pattern No. 243, dated 1926
Folder A007
File Unit 1.007.009.
Water Outlet Manifold,
1924
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-320. Water Outlet Manifold, for 35 h.p. engine, dated 1924
Folder A007
File Unit 1.007.010.
Side Muffler,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-321. Side Muffler, Part No. 10-P-21, for 10,12,16,20 h.p. engines, dated 1920, reissued 1926
Box 02 - Folder 13
File Unit 1.007.011.
Elbow for Side Muffler,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-322. Elbow for Side Muffler, Part No. 10-P-22, for 10, 12,16,20 h.p. engines, dated 1920, reissued 1926
Box 02 - Folder 13
File Unit 1.007.012.
Hot Pocket for Side Muffler,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-330. Hot Pocket for Side Muffler, for C-1, D-1, E-1, F-1 Type engines, dated 1920, reissued 1929
Box 02 - Folder 13
File Unit 1.007.013.
Intake Pipe,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-362. Intake Pipe, for A Type engine, dated 1927
Box 02 - Folder 13
File Unit 1.007.014.
Casing for Muffler (Revised),
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-372. Casing for Muffler (Revised), for C-1, D-1, E-1, F-1 Type engines, dated 1920
Box 02 - Folder 13
File Unit 1.007.015.
Finished Intake Valve with Stem,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-378. Finished Intake Valve with Stem, Part No. 20-F-7, for F-2 Type engine, dated 1919, reissued 1927
Box 02 - Folder 13
File Unit 1.007.016.
Finished Exhaust Valve with Stem,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-379. Finished Exhaust Valve with Stem, Part No. 20-F-11, for F-2 Type engine, dated 1919, reissued 1927
Folder A007
File Unit 1.007.017.
Muffler Return Side Muffler Type,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-386. Muffler Return Side Muffler Type, for A-1, B-1 Type engines, dated 1927
Box 02 - Folder 13
File Unit 1.007.018.
Connecting rod (brasses at both ends),
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-388. Connecting Rod ( Brassses At Both Ends), for F-2 Type engine, dated 1919, reissued 1927
Box 02 - Folder 13
File Unit 1.007.019.
Brass, Lower Half,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-389. Brass, Lower Half, for C-1, F-2, G-3 Type engines, dated 1919, reissued 1927
Box 02 - Folder 13
File Unit 1.007.020.
Brass Cap for Wrist Pin,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-390. Brass Cap for Wrist Pin, for C-1, F-2, G-3 Type engines, dated 1919, reissued 1927
Box 02 - Folder 13
File Unit 1.007.021.
Connecting Rod,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-391. Connecting Rod for B-1 Type engine, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.022.
Wrist Pin Brass, Lower,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-392. Wrist Pin Brass, Lower, for B-1, E-2 Type engines, dated 1919, reissued 1926, 1927
Box 02 - Folder 13
File Unit 1.007.023.
Wrist Pin Brass Cap,
1925
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-393. Wrist Pin Brass Cap, Part No. KY 108-E, for 8, 16 h.p. engines, dated1925, reissued 1927
Box 02 - Folder 13
File Unit 1.007.024.
Connecting rod (brasses at both ends),
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-399. Connecting Rod (Brasses at both ends), FOR D-2 Type engines, dated 1920, reissued 1926, 1927
Box 02 - Folder 13
File Unit 1.007.025.
Wrist Pin Brass Upper Half,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-400. Wrist Pin Brass Upper Half, for A-1, D-2 Type engines, dated 1920
Box 02 - Folder 13
File Unit 1.007.026.
Wrist Pin Brass Lower Half,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-401. Wrist Pin Brass Lower Half, for A-1, D-2 Type engines, dated 1920
Box 02 - Folder 13
File Unit 1.007.027.
Bearing and Bracket for Advance Eccentric Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-405. Bearing and Bracket for Advance Eccentric Shaft, for D-1, E-1 Type engines, dated 1920, reissued 1927
Folder A007
File Unit 1.007.028.
Throttle Shaft Eccentric,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-411. Throttle Shaft Eccentric, for F-1 Type engine, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.029.
Eccentric for Throttle Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-415. Eccentric for Throttle Shaft, for F-1 Type engines, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.030.
Cylinder 10 h.p.,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
Sketch-417. Cylinder 10 h.p., Part No. 10-D-1, for C-1 Type engine, dated 1920, reissued 1935, 1938
Box 02 - Folder 13
File Unit 1.007.031.
Bolt for Connecting Rod (Wrist Pin End),
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-419. Bolt for Connecting Rod (Wrist Pin End) for D-4 Type engine, dated 1920, reissued 1929
Box 02 - Folder 13
File Unit 1.007.032.
Bolt for Connecting Rod (Wrist Pin End),
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-420. Bolt for Connecting Rod (Wrist Pin End) for F-4, G-6 Type engine, dated 1920, reissued 1929
Box 02 - Folder 13
File Unit 1.007.033.
Bolt for Connecting Rod (Wrist Pin End),
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-427. Bolt for Connecting Rod (Wrist Pin End) Part No. KY-111-1, for B-2 Type engine, dated 1920, reissued 1929
Box 02 - Folder 13
File Unit 1.007.034.
Bearing For Spark Advance Eccentric Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
Sketch-431. Bearing For Spark Advance Eccentric Shaft, for F-2 Type engines, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.035.
Reverse Cam, Cam Shaft Side - Right Hand,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-432. Reverse Cam, Cam Shaft Side - Right Hand, Part No. KY 286 for F-1, G-2 Type engines, dated 1920, reissued 1927
Box 02 - Folder 13
File Unit 1.007.036.
Reverse Cam, Exhaust Side - Left Hand,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-433. Reverse Cam, Exhaust Side - Left Hand, Part No. KY 289 for F-1, G-1 Type engines, dated 1920, reissued 1927
Folder A007
File Unit 1.007.037.
Cam Shaft Assembly,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
Sketch-437. Cam Shaft Assembly for F-1 Type engine, dated 1919, reissued 1927
Box 02 - Folder 14
File Unit 1.007.038.
Pin for Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-438. Pin for Reverse DOG, Part No. KY 305, for F-2, G-2 Type engines, dated 1920, reissued 1927
Folder A007
File Unit 1.007.039.
Fly Wheel,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-442. Fly Wheel, dated 1920, reissued 1926
Box 02 - Folder 14
File Unit 1.007.040.
Stud for Cylinder,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-447. Stud for Cylinder, for F-3 Type engine, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.041.
Stud for Cylinder,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-448. Stud for Cylinder, for F-4 Type engine, dated 1920, reissued 1927
Folder A007
File Unit 1.007.042.
Cylinder Head,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
6 items (2 blueprints and 4 diazos).
Scope and Content Note
Sketch-453. Cylinder Head, 1 Right & 1 Left hand - Left hand as shown, dated 1920, reissued 1935, 1938, 1939
Box 02 - Folder 14
File Unit 1.007.043.
Cylinder for Water Pump,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-454. Cylinder for Water Pump, for A-1 Type engine, dated 1920
Box 02 - Folder 14
File Unit 1.007.044.
Plunger for Water Pump,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-455. Plunger for Water Pump, for A-1 Type engine, dated 1920
Box 02 - Folder 14
File Unit 1.007.045.
Gland for Water Pump,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-456. Gland for Water Pump, for A-1 Type engine, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.046.
Spring for Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-458. Spring for Reverse DOG, for F-2 Type engine, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.047.
Bracket for Exhaust Relief Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-473. Bracket for Exhaust Relief Shaft, for C-1 Type engine, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.048.
Exhaust Rocker Arm,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (3 blueprint).
Scope and Content Note
Sketch-475. Exhaust Rocker Arm for C-1 Type engine, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.049.
Intake Rocker Arm,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-476. Intake Rocker Arm, For C-1 Type engine, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.050.
Lag Studs 1/2 inch,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
"Sketch-477. Lag Studs 1/2"", Part No. 6-T-7, for 6,8,10,12,16 h.p. engines, dated 1920, reissued 1927"
Box 02 - Folder 14
File Unit 1.007.051.
Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
Sketch-483. Reverse DOG, Part No. DY 302, for A-2 Type engine, dated 1920, reissued 1926
Folder A008
File Unit 1.007.052.
Cylinder Head 16 h.p. Left Hand,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
6 items (3 blueprint and 3 diazos).
Scope and Content Note
Sketch-485. Cylinder Head 16 h.p. Left Hand for E-1 Type engine, dated 1920, reissued 1926, 1935
Folder A008
File Unit 1.007.053.
Cylinder Head 12 h.p.,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
5 items (1 blueprint and 4 diazos).
Scope and Content Note
Sketch-486. Cylinder Head 12 h.p., dated 1920, reissued 1927, 1935, 1936, 1946, 1947
Box 02 - Folder 14
File Unit 1.007.054.
Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-487. Reverse DOG, Part No. BY 302, for B-2, C-2, D-2, E-2 Type engines, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.055.
Spring for Exhaust Valve,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-488. Spring for Exhaust Valve, for C-1, F-2 Type engines, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.056.
Spring for Intake Valve,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Sketch-489. Spring for Intake Valve for C-1, F-2 Type engines, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.057.
Throttle Handle,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-490. Throttle Handle, Part No. 6-G-7, for A-1 Type engine, dated 1920, reissued 1926
Box 02 - Folder 14
File Unit 1.007.058.
Lever for Spark Control Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (4 blueprints).
Scope and Content Note
Sketch-491. Lever for Spark Control Shaft, Part No. 12-M-19, for D-2, E-2, F-2 Type engines, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.059.
Lever for Spark Advance Eccentric Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-492. Lever for Spark Advance Eccentric Shaft, Part No. 12-M-20, for 12, 16, 20 h.p. engines, dated 1920, reissued 1927
Box 02 - Folder 14
File Unit 1.007.060.
Hand Wheel for Spark Control,
1927
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
Sketch-501-F. Hand Wheel for Spark Control, dated 1927
Box 02 ::Folder A008
Subseries 1.008.
Miscellaneous engines and parts,
1926-1936
(bulk )
Physical Description:
3 items
Scope and Content
Fabrication plans for "Misc." type marine engine.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "Misc." in the title block, and are stored in one 8 inch box and one A size flat
file.
Folder A008
File Unit 1.008.001.
Standard Bilge Pump General Assembly,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Misc.-M-1-W, Standard Bilge Pump General Assembly, dated 1926
Folder A008
File Unit 1.008.002.
Generator Mounting Friction Drive,
1926
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
Misc., Generator Mounting Friction Drive, dated 1926
Box 02 - Folder 15
File Unit 1.008.003.
P.D. Sheave 36 inches bushed,
1936
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
"Misc. N 1680, P.D. Sheave 36"" Bushed, dated 1936"
Box 02 ::Folder A008::Folder A009::Folder A010
Subseries 1.009.
AY type marine engine plans,
1918-1936
(bulk )
Physical Description:
286 items
Scope and Content
Fabrication plans for "AY" type marine engine.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "AY" in the title block, and are stored in one 8 inch box and three A size flat files.
Folder A008
File Unit 1.009.001.
Bearing Cap Front,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-2-C. Bearing Cap Front, Part No. AY-2, Pattern no. AY-2. Dated 1925, Reissued 1926.
Folder A008
File Unit 1.009.002.
Thrust Bearing Cap,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-4-D. Thrust Bearing Cap, Part No. AY-4, Pattern no. AY-4, Dated 1925, Reissued 1926.
Folder A008
File Unit 1.009.003.
Tie Rod,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-10. Tie Rod, Part No. AY-10-1, Dated 1925, Reissued 1927
Box 02 - Folder 16
File Unit 1.009.004.
Standard For Oiler,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
AY-11-E. Standard For Oiler, Part No. AY-11-1, Pattern no. AY-11, Dated 1925, Reissued 1926, 1936
Box 02 - Folder 16
File Unit 1.009.005.
Front Bearing Shim,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-14-E. Front Bearing Shim, Part No. AY-14, Dated 1926
Folder A008
File Unit 1.009.006.
Thrust Bearing Shim,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-16. Thrust Bearing Shim, Dated 1926
Folder A008
File Unit 1.009.007.
Bearing Cap Rear,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-17-D. Bearing Cap Rear, Part No. AY-17, Pattern No. AY-17, Dated 1926
Box 02 - Folder 16
File Unit 1.009.008.
Rear Bearing Shim,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-18-E. Rear Bearing Shim, Part No. AY-18, Dated 1926
Box 02 - Folder 16
File Unit 1.009.009.
Oil Well Cover,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-19-E. Oil Well Cover, Part No. AY-19, Dated 1926
Box 02 - Folder 16
File Unit 1.009.010.
Oil Well Cover,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-20-E. Oil Well Cover, Part No. AY-20, Dated 1926
Box 02 - Folder 16
File Unit 1.009.011.
Handle for Side Cover,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-21-E. Handle for Side Cover, Part No. AY-21, Dated 1926
Box 02 - Folder 16
File Unit 1.009.012.
Tie Rod,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-23. Tie Rod, Part No. AY-23-1, Dated 1926
Box 02 - Folder 16
File Unit 1.009.013.
Camshaft Drive Gear,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
AY-29. Camshaft Drive Gear, Part No. AY-29-1; Dated 1925
Box 02 - Folder 16
File Unit 1.009.014.
Flywheel Nut,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 30-E. Flywheel Nut, Part No. AY-30-E, ated 1926
Box 02 - Folder 16
File Unit 1.009.015.
Flywheel Washer,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-31-E. Flywheel Washer, Part No. AY-31-E; Dated 1926.
Folder A008
File Unit 1.009.016.
Miter Gear for Reverse Drive on Crank Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
4 items (4 blueprints).
Scope and Content Note
AY- 32. Miter Gear for Reverse Drive on Crank Shaft, Part No. AY-32-1, Pattern No. AY-32, two Dated 1918, two Dated 1926
Folder A008
File Unit 1.009.017.
Water Pump Eccentric,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 37. Water Pump Eccentric, Part No. AY-37-A, Pattern No. AY-37-A, Dated 1924
Folder B005
File Unit 1.009.018.
Engine Cylinder,
1931
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
AY- 51-A. Engine Cylinder, Pattern No. AY-51-A, Dated 1931
Folder B005
File Unit 1.009.019.
Cylinder Head,
1925
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
AY- 52-B. Cylinder Head, Part No. AY-52-B, Pattern No. AY-52, Dated 1925
Box 02 - Folder 16
File Unit 1.009.020.
Exhaust Valve Spring,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 55. Exhaust Valve Spring, Part No. AY-55-1, Part No. AY-55-2, Dated 1927
Folder A008
File Unit 1.009.021.
Exhaust Valve,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY- 56. Exhaust Valve, Part No. AY-56-2, Dated 1927
Box 02 - Folder 16
File Unit 1.009.022.
Valve Spring Retainer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 57. Valve Spring Retainer, Part No. AY-57-1, Dated 1927
Box 02 - Folder 16
File Unit 1.009.023.
Retainer Nut,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 58-E. Retainer Nut, Part No. AY-58, Dated 1926
Box 02 - Folder 16
File Unit 1.009.024.
Intake Valve Spring,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
AY- 59. Intake Valve Spring, Part No. AY-59-1, Part No. AY-59-2, Dated 1927
Box 02 - Folder 16
File Unit 1.009.025.
Water By-Pass,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 60. Water By-Pass, Part No. AY-60-A, Pattern No. AY-60-A, Dated 1925
Box 02 - Folder 16
File Unit 1.009.026.
Hand Hole Cover,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 62-E. Hand Hole Cover, Pattern No. AY-62, Dated 1924
Box 02 - Folder 16
File Unit 1.009.027.
Cylinder Head Stud,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (1 blueprint and 1 other).
Scope and Content Note
AY- 63-E. Cylinder Head Stud, Dated 1925
Box 02 - Folder 16
File Unit 1.009.028.
Valve Cap,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 64. Valve Cap, Pattern No. AY-64-1, Dated 1927
Box 02 - Folder 16
File Unit 1.009.029.
Valve Nut,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 65. Valve Nut, Part No. AY-65-1, Dated 1924
Box 02 - Folder 16
File Unit 1.009.030.
Spring Retainer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 66. Spring Retainer, Part No. AY-66-A, Pattern No. AY-66-A, Dated 1927
Folder A008
File Unit 1.009.031.
Intake Valve,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY- 67. Intake Valve, Part No. AY-67-2, Dated 1927
Folder A009
File Unit 1.009.032.
Cylinder Head Gasket,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 diazos).
Scope and Content Note
AY- 72-D. Cylinder Head Gasket, Part No. AY-72-1, Dated 1926, Reissued 1945
Box 02 - Folder 17
File Unit 1.009.033.
Safety Collar,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 73. Safety Collar, Dated 1927, Reissued 1928
Box 02 - Folder 17
File Unit 1.009.034.
Gasket-Exhaust Manifold-Cylinder Head,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 74-E. Gasket-Exhaust Manifold-Cylinder Head, Part No. AY-74, Dated 1926
Folder A009
File Unit 1.009.035.
Hand Hole Cover Gasket,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 78. Hand Hole Cover Gasket, Dated 1926
Box 02 - Folder 17
File Unit 1.009.036.
Intake Manifold Gasket,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 79-E. Intake Manifold Gasket, Part No. AY-79, Dated 1926
Folder A009
File Unit 1.009.037.
Water By-Pass Gasket,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 80. Water By-Pass Gasket, Dated 1926
Box 02 - Folder 17
File Unit 1.009.038.
Water Outlet Manifold Gasket,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 81-E. Water Outlet Manifold Gasket, Part No. AY-81, Dated 1926
Box 02 - Folder 17
File Unit 1.009.039.
Gasket-Exhaust Manifold-Exh. Flange,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 82-E. Gasket-Exhaust Manifold-Exh. Flange ,Part No. AY-82, Dated 1926
Box 02 - Folder 17
File Unit 1.009.040.
Water Outlet Manifold Gasket,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 83-E. Water Outlet Manifold Gasket, Part No. AY-83, Dated 1926
Folder A009
File Unit 1.009.041.
Piston,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
AY- 101-E. Piston, Part No. AY-101-A, Pattern No. AY-101-A, Dated 1926
Box 02 - Folder 17
File Unit 1.009.042.
Piston Pin,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 102-E. Piston Pin, Part No. AY-102-1, Dated 1926
Box 02 - Folder 17
File Unit 1.009.043.
Piston Pin Bearing - Upper Half,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 108-A. Piston Pin Bearing - Upper Half, Pattern No. AY- 108, Dated 1924, Reissued 1927
Box 02 - Folder 17
File Unit 1.009.044.
Piston Pin Brg - Lower Half,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 109. Piston Pin Bearing - Lower Half, Part No. AY-113-A, Pattern No. AY-109-A, Dated 1926
Folder A009
File Unit 1.009.045.
Piston Pin Bearing Shim,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
AY- 110. Piston Pin Bearing Shim, Dated 1926
Box 02 - Folder 17
File Unit 1.009.046.
Connecting Rod Bolt (Upper),
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 111. Connecting Rod Bolt (Upper), Part No. AY-111-2, Dated 1927
Folder A009
File Unit 1.009.047.
Connecting Rod,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 diazo).
Scope and Content Note
AY- 112-A. Connecting Rod, Pattern No. AY-112, Dated 1924, Reissued 1947
Box 02 - Folder 17
File Unit 1.009.048.
Crank Pin Brg Upper,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
5 items (2 blueprints and 3 diazos).
Scope and Content Note
AY- 113. Crank Pin Brg Upper, Part No. AY-113-A2, Pattern No. AY 113-A, Dated 1927, Reissued 1938
Box 02 - Folder 17
File Unit 1.009.049.
Crank Pin Bearing Lower,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
4 items (1 blueprint and 3 diazos).
Scope and Content Note
AY- 114-E. Crank Pin Bearing Lower, Pattern No. AY-114-A, Dated 1925, Reissued 1928
Folder A009
File Unit 1.009.050.
Crank Pin Brg Shim,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
AY- 115. Crank Pin Brg Shim, Dated 1926
Box 02 - Folder 17
File Unit 1.009.051.
Connecting Rod Bolt (Lower),
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 116-E. Connecting Rod Bolt (Lower), Dated 1925
Folder A009
File Unit 1.009.052.
Camshaft Gear,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
AY- 127-C. Camshaft Gear, Part No. AY- 127-A, Pattern No. AY-127, Dated 1925, Reissued 1927
Box 02 - Folder 17
File Unit 1.009.053.
Exhaust Cam,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 130. Exhaust Cam, Part No. AY-130-1, Pattern No. AY-130-1, Dated 1927
Box 02 - Folder 17
File Unit 1.009.054.
Inlet Cam,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
6 items (2 blueprints and 4 diazos).
Scope and Content Note
AY- 131. Inlet Cam,Part No. AY-131-1, Pattern No. AY-131-1, Dated 1927
Box 02 - Folder 17
File Unit 1.009.055.
Igniter Spiral Gears,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 132-E. Igniter Spiral Gears, Part No. AY-132, Part No. AY-133, Dated 1925
Box 02 - Folder 17
File Unit 1.009.056.
Camshaft Washer,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 134-E. Camshaft Washer, Part No. AY-134-1, Dated 1925
Box 02 - Folder 17
File Unit 1.009.057.
Spiral Gear Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 136. Spiral Gear Bracket, Part No. AY-136-A2, Pattern No. AY-136-A, Dated 1927
Box 02 - Folder 17
File Unit 1.009.058.
Spark Rod Crank Disc,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 137-E. Spark Rod Crank Disc, Part No. AY-137-1, Dated 1925
Box 02 - Folder 17
File Unit 1.009.059.
Eccentric Plate,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 139-E. Eccentric Plate, Part No. AY-139, Dated 1925
Box 02 - Folder 17
File Unit 1.009.060.
Camshaft Collar,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 140-E. Camshaft Collar, Part No. AY-140, Dated 1925
Box 02 - Folder 17
File Unit 1.009.061.
Camshaft Gear key (on Camshaft),
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY- 143-A. Camshaft Gear key (on Camshaft), Part No. AY-143, Dated 1926
Box 02 - Folder 17
File Unit 1.009.062.
Spiral Gear Bracket Shim,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
AY-146. Spiral Gear Bracket Shim, Dated 1926
Folder A009
File Unit 1.009.063.
Push Rod,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-151. Push Rod, Dated 1925
Box 02 - Folder 17
File Unit 1.009.064.
Fork for Push Rod,
1919
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (1 blueprint).
Scope and Content Note
AY-152. Fork for Push Rod, Dated 1919
Box 02 - Folder 17
File Unit 1.009.065.
Roller for Push Rod Fork,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-153. Roller for Push Rod Fork, Dated 1927
Box 02 - Folder 18
File Unit 1.009.066.
Push Rod Fork Roller,
1918
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-154. Push Rod Fork Roller, Dated 1918
Box 02 - Folder 18
File Unit 1.009.067.
Push Rod Collar,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-157. Push Rod Collar, Dated 1927
Box 02 - Folder 18
File Unit 1.009.068.
Spring for Push Rod,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-158. Spring for Push Rod, Dated 1926
Box 02 - Folder 18
File Unit 1.009.069.
Push Rod End,
1920
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-159. Push Rod End, Dated 1920
Box 02 - Folder 18
File Unit 1.009.070.
Push Rod Spring Base,
1926
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-173. Push Rod Spring Base, Dated 1926
Box 02 - Folder 18
File Unit 1.009.071.
Thermostat Valve Body,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-180. Thermostat Valve Body, Dated 1927
Box 02 - Folder 18
File Unit 1.009.072.
Thermostat Valve Bonnet,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-181. Thermostat Valve Bonnet, Dated 1927
Folder A010
File Unit 1.009.073.
Throttle Quadrant,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-185. Throttle Quadrant, Dated 1927
Box 02 - Folder 18
File Unit 1.009.074.
Plunger,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-186. Plunger, Dated 1927
Box 02 - Folder 18
File Unit 1.009.075.
Stop Pin,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 blueprints).
Scope and Content Note
AY-187. Stop Pin, Dated 1927
Box 02 - Folder 18
File Unit 1.009.076.
Exhaust Rocker Arm,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-203. Exhaust Rocker Arm, Dated 1925
Box 02 - Folder 18
File Unit 1.009.077.
Intake Rocker Arm,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-204. Intake Rocker Arm, Dated 1925
Box 02 - Folder 18
File Unit 1.009.078.
Throttle Handle Stop,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-206. Throttle Handle Stop, Dated 1926
Box 02 - Folder 18
File Unit 1.009.079.
Exhaust Rocker Eccentric,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
5 items (2 blueprints and 3 diazos).
Scope and Content Note
AY-207. Exhaust Rocker Eccentric, Dated 1925
Folder A010
File Unit 1.009.080.
Throttle Handle,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-212. Throttle Handle, Dated 1927
Box 02 - Folder 18
File Unit 1.009.081.
Relief Handle,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-213. Relief Handle, Dated 1926
Box 02 - Folder 18
File Unit 1.009.082.
Intake Rocker Eccentric,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-215. Intake Rocker Eccentric, Dated 1925
Folder A010
File Unit 1.009.083.
Relief Shaft Washer,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-216. Relief Shaft Washer, Dated 1926
Box 02 - Folder 18
File Unit 1.009.084.
Rockershaft Washer,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-217. Rockershaft Washer, Dated 1926
Box 02 - Folder 18
File Unit 1.009.085.
Pin for Intake and Exhaust Rocker Arms,
1920
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-218. Pin for Intake and Exhaust Rocker Arms, Dated 1920
Folder A010
File Unit 1.009.086.
Igniter Body,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
AY-226. Igniter Body, Dated 1927
Box 02 - Folder 18
File Unit 1.009.087.
Igniter Anvil,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-227. Igniter Anvil, Dated 1927
Box 02 - Folder 18
File Unit 1.009.088.
Igniter Insulating Washer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-228. Igniter Insulating Washer, Dated 1927
Box 02 - Folder 18
File Unit 1.009.089.
Mica Tube for Ignitor,
1918
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-229-1. Mica Tube for Ignitor, Dated 1918
Box 02 - Folder 18
File Unit 1.009.090.
Igniter Insulating Tube,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-229-2. Igniter Insulating Tube, Dated 1927
Box 02 - Folder 18
File Unit 1.009.091.
Igniter Insulating Tube,
1933
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
AY-229-3. Igniter Insulating Tube, Dated 1933
Box 02 - Folder 18
File Unit 1.009.092.
Pawl Stop,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-230. Pawl Stop, Dated 1926
Box 02 - Folder 18
File Unit 1.009.093.
Igniter Spindle,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
AY-231. Igniter Spindle, Dated 1928
Box 02 - Folder 18
File Unit 1.009.094.
Igniter Hammer,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
AY-232-1. Igniter Hammer, Dated 1926
Box 02 - Folder 18
File Unit 1.009.095.
Igniter Hammer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
AY-232-2. Igniter Hammer, Dated 1927
Box 02 - Folder 18
File Unit 1.009.096.
Igniter Hammer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-232-3. Igniter Hammer, Dated 1927
Box 02 - Folder 18
File Unit 1.009.097.
Igniter Pawl,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-233. Igniter Pawl, dated 1926
Folder A010
File Unit 1.009.098.
Igniter Spindle Collar,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-234. Igniter Spindle Collar, dated 1926
Box 02 - Folder 18
File Unit 1.009.099.
Igniter Spring Right Hand,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-235. Igniter Spring Right Hand, dated 1926
Folder A010
File Unit 1.009.100.
Igniter Spring Left hand,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-236. Igniter Spring Left hand, dated 1926
Folder A010
File Unit 1.009.101.
Igniter Gasket,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-237. Igniter Gasket, dated 1926
Box 02 - Folder 18
File Unit 1.009.102.
Anvil Washer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
AY-238. Anvil Washer, dated 1927
Box 02 - Folder 18
File Unit 1.009.103.
Anvil Washer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-238. Anvil Washer, dated 1927
Box 02 - Folder 18
File Unit 1.009.104.
Anvil Shank,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-239. Anvil Shank, dated 1927
Box 02 - Folder 18
File Unit 1.009.105.
Spring for Spark Tripper,
1918
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-243. Spring for Spark Tripper, dated 1918
Folder A010
File Unit 1.009.106.
Tripper Hinge Pin,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-244. Tripper Hinge Pin, dated 1926
Box 02 - Folder 18
File Unit 1.009.107.
Spark Rod,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-245. Spark Rod, dated 1927
Box 02 - Folder 18
File Unit 1.009.108.
Crank Bearing for Spark Rod,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-249. Crank Bearing for Spark Rod, dated 1927
Box 02 - Folder 18
File Unit 1.009.109.
Spark Rod Crank Pin,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-250. Spark Rod Crank Pin, dated 1927
Box 02 - Folder 18
File Unit 1.009.110.
Spark Control Bearing Cap,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
4 items (4 blueprints).
Scope and Content Note
AY-252. Spark Control Bearing Cap, dated 1925
Box 02 - Folder 18
File Unit 1.009.111.
Spark Control Link,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (1 blueprint).
Scope and Content Note
AY- 254. Spark Control Link, dated 1927
Box 02 - Folder 18
File Unit 1.009.112.
Spark Rod Guide Pin,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-256. Spark Rod Guide Pin, dated 1926
Box 02 - Folder 18
File Unit 1.009.113.
Spark Control Eccentric Shaft,
1925
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-258. Spark Control Eccentric Shaft, dated 1925
Box 02 - Folder 18
File Unit 1.009.114.
Spark Control Link Pin,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-260. Spark Control Link Pin, dated 1925
Box 02 - Folder 18
File Unit 1.009.115.
Spark Rod Stop Plate,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-263. Spark Rod Stop Plate, dated 1926
Box 02 - Folder 18
File Unit 1.009.116.
Washer for Spark Control Guide Pin,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-264. Washer for Spark Control Guide Pin, dated 1926
Folder A010
File Unit 1.009.117.
Water Pump Eccentric Strap,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-329. Water Pump Eccentric Strap, dated 1924
Folder A010
File Unit 1.009.118.
Magneto Base,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (1 blueprint).
Scope and Content Note
AY-350. Magneto Base, dated 1927
Box 02 - Folder 18
File Unit 1.009.119.
Tie Bolt,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-352. Tie Bolt, dated 1926
Box 02 - Folder 18
File Unit 1.009.120.
Spacer,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-353. Spacer, dated 1926
Box 02 - Folder 18
File Unit 1.009.121.
Oiler Eccentric Strap,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (1 blueprint).
Scope and Content Note
AY-387. Oiler Eccentric Strap, dated 1925
Box 02 - Folder 18
File Unit 1.009.122.
Gas Intake Manifold Flange,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-402. Gas Intake Manifold Flange, dated 1926
Folder A010
File Unit 1.009.123.
Hot Air Heater,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-404. Hot Air Heater, dated 1927
Folder A010
File Unit 1.009.124.
Hot Air Heater,
1929
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-404. Hot Air Heater, dated 1927
Box 02 - Folder 18
File Unit 1.009.125.
Hot Air Tube to Carburetter,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-407. Hot Air Tube to Carburetter, dated 1926
Box 02 - Folder 18
File Unit 1.009.126.
Lag Stud,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
AY-492. Lag Stud, dated 1927
Folder A010
File Unit 1.009.127.
Timing diagram,
1929
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 photocopies).
Scope and Content Note
AY-513. Timing diagram, dated 1929
Box 02 - Folder 18
File Unit 1.009.128.
Template for Exhaust Cam AY-130-2,
1936
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
AY-601. Template for Exhaust Cam AY-130-2, dated 1936
Box 02 - Folder 18
File Unit 1.009.129.
Spark Plug Adapter,
1931
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 diazo).
Scope and Content Note
AY-653. Spark Plug Adapter, dated 1931
Box 02 - Folder 18
File Unit 1.009.130.
Hollow Plug Wrench,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-901. Hollow Plug Wrench, dated 1926
Box 02 - Folder 18
File Unit 1.009.131.
Starting Bar,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
AY-902. Starting Bar, dated 1927
Box 02 - Folder 18
File Unit 1.009.132.
Ignitor Anvil,
1933
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
AY-903. Ignitor Anvil, dated 1933
Box 02 - Folder 18
File Unit 1.009.133.
Ignitor Steel Bushing,
1933
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (3 diazos).
Scope and Content Note
AY-904. Ignitor Steel Bushing, dated 1933
Folder A010
File Unit 1.009.134.
Standard Igniter Assembly -Supersedes AY-510,
1933
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 diazos).
Scope and Content Note
AY-905. Standard Igniter Assembly -Supersedes AY-510, dated 1933
Box 02 ::Folder A011::Folder A012::Folder A013::Folder A014::Folder B005
Subseries 1.010.
BY type 10-14 h.p. 2 cylinder marine engine plans,
1918-1934
(bulk )
Physical Description:
238 items
Scope and Content
Fabrication plans for "BY" 10-14 h.p. two cylinder marine engine.
Arrangement
These fabrication plans used by the Hicks Iron Works, Hicks Engine Works, Yuba Manufacturing Company, and Bay Specialties
Company have a plan number starting with "BY" in the title block, and are stored in one 8 inch box and five oversized flat
folders.
Folder B005
File Unit 1.010.001.
Engine Bed,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (4 diazos).
Scope and Content Note
BY-1. Engine Bed, Part no. BY-1-A2, Pattern No. BY-1-A2; Dated 1927; Reissue dates: 1934, 1938, 1947.
Folder A011
File Unit 1.010.002.
Bearing Cap - Forward,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-2. Bearing Cap - Forward, Part no. BY-2-A, Pattern no. BY-2-A; Dated 1927.
Folder A011
File Unit 1.010.003.
Bearing Cap,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-3. Bearing Cap, Part no. BY-3-B, Pattern no. BY-3-B; Dated 1927.
Folder A011
File Unit 1.010.004.
Bearing Cap,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-4. Bearing Cap, Part no. BY-4-A, Pattern no. BY-4-A; Dated 1927.
Folder A011
File Unit 1.010.005.
Crank Case,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
BY-5. Crank Case, Part No. BY-5-A2, Pattern No. BY-5-A; Dated 1927; Reissue date: 1938.
Folder A011
File Unit 1.010.006.
Magneto Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
BY-7. Magneto Bracket, Part No. BY-7-B, Pattern No. BY-7-B; Dated 1927; Reissue date: 1939.
Folder A011
File Unit 1.010.007.
Gear Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-8. Gear Cover, Part No. BY-8-B, Pattern No. BY-8-B; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.008.
Forward Cover,
1924
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-9. Forward Cover, Part No. BY-9-1; Dated 1924; Reissue date: 1927.
Folder A011
File Unit 1.010.009.
Starboard Side Cover,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-12-D. Starboard Side Cover, Part No. BY-12; Dated 1926.
Folder A011
File Unit 1.010.010.
Portside Cover,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-13-D. Portside Cover, Part No. BY-13; Dated 1926.
Box 02 - Folder 21
File Unit 1.010.011.
Forward Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-14. Forward Bearing Shim, Part No. BY-14-1; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.012.
Center Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-15. Center Bearing Shim, Part No. BY-15-2; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.013.
Thrust Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
BY-16. Thrust Bearing Shim, Part No. BY-16-1; Dated 1927
Folder A011
File Unit 1.010.014.
Bearing Cap-Rear,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-17. Bearing Cap-Rear, Part No. BY-17-A, Pattern No. BY-17-A; Dated 1927
Box 02 - Folder 21
File Unit 1.010.015.
Rear Bearing Shim,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-18. Rear Bearing Shim, Part No. BY-18-1; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.016.
Oil Well Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-19. Oil Well Cover, Part No. BY-19-1; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.017.
Oil Well Cover,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-20. Oil Well Cover, Part No. BY-20-1; Dated 1927.
Folder A011
File Unit 1.010.018.
Magneto Gear Cover,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-24. Magneto Gear Cover, Part No. BY-24, Pattern No. BY-24-B; Dated 1926.
Folder A011
File Unit 1.010.019.
Crankshaft,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
BY-26-D. Crankshaft, Part No. BY-26-1; Dated 1926.
Folder A011
File Unit 1.010.020.
Flywheel,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
BY-27-C. Flywheel, Part No. BY-27-A, Pattern No. BY-27; Dated 1926, Reissue date: 1938.
Folder A011
File Unit 1.010.021.
Air Compressor Eccentric,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (2 blueprints and 2 diazos).
Scope and Content Note
BY-28. Air Compressor Eccentric, Part No. BY-28-B, Pattern No. BY-28-B; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.022.
Flywheel Key,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-38-E. Flywheel Key, Part No. BY-38; Dated 1926.
Box 02 - Folder 21
File Unit 1.010.023.
Camshaft Gear Key (on Crankshaft),
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-39-E. Camshaft Gear Key (on Crankshaft), Part No. BY-39; Dated 1926.
Box 02 - Folder 21
File Unit 1.010.024.
Reverse Gear Key,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-40. Reverse Gear Key, Part No. BY-40-2; Dated 1927.
Folder A011
File Unit 1.010.025.
Exhaust Manifold,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
BY-53. Exhaust Manifold, Part No. BY-53-C, Pattern No. BY-53-C; Dated 1927, Reissue date: 1939.
Box 02 - Folder 21
File Unit 1.010.026.
Muffler Stud,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-70. Muffler Stud, Part No. BY-70-1; Dated 1927.
Folder A011
File Unit 1.010.027.
Water Inlet Manifold,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-75. Water Inlet Manifold, Part No. BY-75-B, Pattern No. BY-75-B; Dated 1927.
Folder A011
File Unit 1.010.028.
Water Outlet Manifold,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-76-C. Water Outlet Manifold, Part No. BY-76-A, Pattern No. BY-76; Dated 1925, Reissue date: 1927.
Folder B005
File Unit 1.010.029.
Side Exhaust Elbow,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
BY-86. Side Exhaust Elbow, Part No. BY-86-A2, Pattern No. BY-86-A2; Dated 1926, Reissue date: 1946.
Box 02 - Folder 21
File Unit 1.010.030.
Companion Flange,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-87-E. Companion Flange, Part No. BY-87, Pattern No. BY-87; Dated 1926,
Box 02 - Folder 21
File Unit 1.010.031.
Companion Flange Gasket,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-88. Companion Flange Gasket, Part No. BY-88-2; Dated 1926.
Box 02 - Folder 21
File Unit 1.010.032.
Oil Scoop,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
BY-117. Oil Scoop, Part No. BY-117-1; Dated 1928, Reissue date 1939.
Box 02 - Folder 21
File Unit 1.010.033.
Camshaft Bearing Cap,
1925
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-129. Camshaft Bearing Cap, Part No. By-129-A, Pattern No. BY-129-A; Dated 1925, Reissue date 1927.
Box 02 - Folder 21
File Unit 1.010.034.
Camshaft Bearing Cap,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-129. Camshaft Bearing Cap, Part No. By-129-A2, Pattern No. BY-129-A; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.035.
Camshaft Bearing Cap,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-129. Camshaft Bearing Cap, Part No. By-129-A3, Pattern No. BY-129-A; Dated 1927.
Folder A012
File Unit 1.010.036.
Camshaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
BY-135. Camshaft, Part No. BY-132-2; Dated 1927, Reissue date 1947.
Folder A012
File Unit 1.010.037.
Camshaft Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-142. Camshaft Bracket, Part No. BY-142-B; Dated 1927.
Folder A012
File Unit 1.010.038.
Generator Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-175. Generator Bracket, Part No. BY-175-A, Pattern No. BY-175-A; Date 1927.
Box 02 - Folder 21
File Unit 1.010.039.
Generator Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-175. Generator Bracket, Part No. BY-175-B, Pattern No. BY-175-B; Date 1927.
Folder A012
File Unit 1.010.040.
Rockershaft Bracket,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-201-D. Rockershaft Bracket, Part No. BY-201, Pattern No. BY-201; Dated 1925.
Folder A012
File Unit 1.010.041.
Rockershaft,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-208-E. Rockershaft, Part No. BY-208; Date 1925, Reissue date 1926.
Folder A012
File Unit 1.010.042.
Rockershaft,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-208-E. Rockershaft, Part No. BY-208-1; Date 1925, Reissue date 1927.
Folder A012
File Unit 1.010.043.
Relief Shaft,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-209-D. Relief Shaft, Part No. BY-209; Date 1925, Reissue date 1926.
Folder A012
File Unit 1.010.044.
Relief Shaft,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
3 items (3 blueprints).
Scope and Content Note
BY-209-D. Relief Shaft, Part No. BY-209-1; Date 1925, Reissue date 1938.
Box 02 - Folder 21
File Unit 1.010.045.
Magneto Gear,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-248-E. Magneto Gear, Part No. BY-248, Pattern No. BY-248; Dated 1925, Reissue date 1926.
Folder A012
File Unit 1.010.046.
Spark Control Bracket,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-251-E. Spark Control Bracket, Part No. BY-251-A, Pattern No. BY-251; Dated 1925, Reissue date 1927.
Folder A012
File Unit 1.010.047.
Spark Control Rod,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-253-E. Spark Control Rod,Part No. BY-253-1; Dated 1925, Reissue date 1927.
Box 02 - Folder 21
File Unit 1.010.048.
Miter Gear Idler for Reverse,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
BY-272. (old-E-712), for 8 H.P and 10 H.P., Miter Gear Idler for Reverse, Part No. 8-L-2; Dated 1918, Reissue date 1936.
Folder A012
File Unit 1.010.049.
Miter Gear Idler,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
3 items (1 blueprint and 2 diazos).
Scope and Content Note
BY-272. Miter Gear Idler, Part No. BY-272-A,Pattern No. BY-272-A, Dated 19127, Reissue date 1938.
Folder A012
File Unit 1.010.050.
Reverse Drum,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-273-D. Reverse Drum, Part No. (old 8-L-1) BY-273, Pattern No. BY-273; Dated 1918, Reissue date 1926.
Box 02 - Folder 21
File Unit 1.010.051.
Reverse Friction,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 diazos).
Scope and Content Note
BY-274-A. C-1, D-1, E-1 engines, Reverse Friction, Dated 1918, Reissue date 1935.
Box 02 - Folder 21
File Unit 1.010.052.
Miter Gear for Reverse Friction,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
3 items (2 blueprints and 1 diazo).
Scope and Content Note
BY-275. Miter Gear for Reverse Friction, Part No. (old-B-L-6) for 8 H.P. engine (annotated with 'old style'); Dated 1918,
Reissue date 1939.
Folder A012
File Unit 1.010.053.
Brake Shoe Bracket,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-276. Brake Shoe Bracket, Part No. BY-276-A, Pattern No. BY-276-A; Dated 1925, Reissue date 1927.
Box 02 - Folder 21
File Unit 1.010.054.
Reverse Lever Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-277. Reverse Lever Bracket, Part No. BY-277-B, Pattern No. BY-277-B; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.055.
Brake Shoe,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-278-E. B-2, C-2, D-2 and E-2 engines, Brake Shoe, Dated 1919, Reissue date 1926.
Folder A012
File Unit 1.010.056.
Pin for Brake Shoe,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-279. Pin for Brake Shoe, Dated 1926.
Box 02 - Folder 21
File Unit 1.010.057.
Strap for Reverse Drum,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-280. Strap for Reverse Drum, (Old Drawing No. 8-K-5), Dated 1918, Reissue date 1926; see blueprint for engine types.
Box 02 - Folder 21
File Unit 1.010.058.
Strap Fulcrum Pin,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-281-E. Strap Fulcrum Pin, Dated 1924, Reissue date 1926.
Box 02 - Folder 21
File Unit 1.010.059.
Spreader for Reverse Drum Straps,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-283-E. Spreader for Reverse Drum Straps, Part No. BY-283, for B-1, C-1, D-1 and E-1 engines; Dated 1918, Reissue date 1926.
Box 02 - Folder 21
File Unit 1.010.060.
Spreader Cam for Reverse Drum Strap,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
BY-284. Spreader Cam for Reverse Drum Strap, (old part no. 8-K-9); Dated 1919, Reissue date 1938.
Folder A012
File Unit 1.010.061.
Reverse Cam Shaft,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-285-D. Reverse Cam Shaft, Part No. BY-285; Dated 1926.
Box 02 - Folder 21
File Unit 1.010.062.
Reverse Cam,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-286-E. Reverse Cam, Part No. BY-286; Pattern No. BY-286; Dated 1926.
Box 02 - Folder 21
File Unit 1.010.063.
Lever for Reverse Cam Shaft,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-288. Lever for Reverse Cam Shaft, (old Part No. 6-K-12) A-1, B-1, C-1, D-1, E-1 engines; Dated 1918.
Box 02 - Folder 21
File Unit 1.010.064.
Spring for Reverse Cam Shaft,
1919
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-289. Spring for Reverse Cam Shaft, for B-2, C-2, D-2, E-2 engines; Dated 1919, Reissue date 1926.
Folder A012
File Unit 1.010.065.
Reverse Lever,
1925
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-290-D. Reverse Lever, Part No. BY-290-1; Dated 1925, Reissue date 1927.
Box 02 - Folder 21
File Unit 1.010.066.
Reverse Lever Handle,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-291. Reverse Lever Handle, Part No. BY-291-B, Pattern No. BY-291-B; Dated 1926, Reissue date 1927.
Box 02 - Folder 21
File Unit 1.010.067.
Reverse Lever Fulcrum Pin,
1924
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-292-E. Reverse Lever Fulcrum Pin, Part No. BY-292-1; Dated 1924, Reissue date 1926.
Box 02 - Folder 21
File Unit 1.010.068.
Rivet,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-293. Rivet, Part No. BY-293-1; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.069.
Link for Reverse Lever,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-294. Link for Reverse Lever, Part No. BY-294-2; Dated 1927.
Box 02 - Folder 21
File Unit 1.010.070.
Washer for Thrust Collar & Coupling,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-295. Washer for Thrust Collar & Coupling, (old Part No. 8-L-21) for B-2, C-1, D-1, E-1 engines; Dated 1920, Reissue date
1926.
Box 02 - Folder 22
File Unit 1.010.071.
Pin for Reverse Drum,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-301-E. Pin for Reverse Drum,Part No. BY-301; Dated 1926.
Box 02 - Folder 22
File Unit 1.010.072.
Reverse DOG,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
5 items (1 blueprint and 4 diazos).
Scope and Content Note
BY-302-E. Reverse DOG, Part No. BY-302, Pattern No. BY-302; Dated 1926, Reissue date: 1936.
Box 02 - Folder 22
File Unit 1.010.073.
Reverse DOG Screw,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-303. Reverse DOG Screw, Part No. BY-303-1; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.074.
Spring for Reverse DOG,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-304. Spring for Reverse DOG, (old part no. 8-L-10) for B-2, C-2, D-2, E-2 engines; Dated 1918, Reissue date 1927.
Box 02 - Folder 22
File Unit 1.010.075.
Pin for Reverse DOG,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-305. Pin for Reverse DOG, (old part no. 8-L-12); Dated 1920, Reissue date 1926.
Box 02 - Folder 22
File Unit 1.010.076.
Spreader Cone,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-306. Spreader Cone, Part No. BY-306-1; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.077.
Yoke for Clutch Spreader Cone,
1918
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-307. Yoke for Clutch Spreader Cone, (old part no. 8-L-14) for B-1, C-1, D-1, E-1 engines, Dated 1918, Reissue date 1926.
Folder A013
File Unit 1.010.078.
Thrust Shaft,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-308. Thrust Shaft, Part No. BY-308-2; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.079.
Bushing for Thrust Shaft,
1920
Creator/Collector:
Hicks Iron Works
Physical Description:
2 items (1 blueprint and 1 diazo).
Scope and Content Note
BY-309. Bushing for Thrust Shaft, (old part no. 8-L-16) for B-1, C-1, D-1, E-1 engines; Dated 1920, Reissue date 1938.
Box 02 - Folder 22
File Unit 1.010.080.
Thrust Shaft Collar,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-310. Thrust Shaft Collar, Part No. BY-310-B, Pattern No. BY-310-B; Dated 1927.
Folder A013
File Unit 1.010.081.
Thrust Coupling,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-311. Thrust Coupling, Part No. BY-311-A, Pattern No. BY-311-A; Dated 1927.
Folder A013
File Unit 1.010.082.
Thrust Coupling,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-311. Thrust Coupling, Part No. BY-311-A2, Pattern No. BY-311-A; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.083.
Reverse Friction Key,
1926
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-312. Reverse Friction Key, Part No. BY-312-1; Dated 1926, Reissue date: 1927.
Box 02 - Folder 22
File Unit 1.010.084.
Thrust Coupling Key,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-313. Thrust Coupling Key, Part No. BY-313-2; Dated 1927.
Folder A013
File Unit 1.010.085.
Water Pump Body,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
4 items (1 blueprint and 3 diazos).
Scope and Content Note
BY-326. Water Pump Body, Part No. BY-326-A2, Pattern No. BY-326-A; Dated 1926, Reissue date 1939.
Folder A013
File Unit 1.010.086.
Water Pump Plunger,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
4 items (1 blueprint and 3 diazos).
Scope and Content Note
BY-327. Water Pump Plunger, Part No. BY-327-B; Dated 1928, Reissue date 1939.
Box 02 - Folder 22
File Unit 1.010.087.
Water Pump Gland,
1928
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
5 items (2 blueprints and 3 diazos).
Scope and Content Note
BY-328. Water Pump Gland, Part No. BY-328-B; Dated 1928, Reissue date 1939.
Box 02 - Folder 22
File Unit 1.010.088.
Water Pump Plunger Pin,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-330-E. Water Pump Plunger Pin, Part No. BY-330; Dated 1926.
Folder A013
File Unit 1.010.089.
Pump Outlet,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-332. Pump Outlet, Part No. BY-332-A, Pattern No. BY-332-A; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.090.
Valve Washer,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-340. Valve Washer, Part No. BY-340-1; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.091.
Valve Spring,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-344. Valve Spring, Part No. BY-344-1; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.092.
Inlet Gasket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-345. Inlet Gasket, Part No. BY-345-1; Dated 1927.
Box 02 - Folder 22
File Unit 1.010.093.
Outlet Gasket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
2 items (2 blueprints).
Scope and Content Note
BY-346. Outlet Gasket, Part No. BY-346-1; Dated 1927.
Folder A013
File Unit 1.010.094.
Oiler Bracket,
1927
Creator/Collector:
Yuba Manufacturing Co. (San Francisco, Calif.)
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-385. Oiler Bracket, Part No. BY-385-C, Pattern No. BY-385-C; Dated 1927.
Folder A013
File Unit 1.010.095.
Oiler Bracket R.H.,
1926
Creator/Collector:
Hicks Engine Works
Physical Description:
1 items (1 blueprint).
Scope and Content Note
BY-386. Oiler Bracket R.H., Part No. BY-386-B, Pattern No. BY-386-B; Dated 1926.
Box 02 - Folder 22
File Unit 1.010.096.
Oil Pipe Clip (E-Pipes),
1926
Creator/Collector:
Hicks Engine Works